WDLR 4-6-0 Baldwin from CWRailways

[mozzer models]

CW Railways are making 009 & O-16.5 4-6-0 WDLR Baldwins the one i went for is a type 2 there are 6 in the range www.cwrailways.com/baldwins

to finish the 009 loco you need a Farish old type 08 or J94 chassis

& a set of Baldwin valve gear from RT Models & will also need a bogie which will need scratch building or using a RT Models 4ncp040 & Bemo wheels 5002

 

The photos show the body as it arrived with out any work

001 by Mozzer models, on Flickr

 

002 by Mozzer models, on Flickr

 

003 by Mozzer models, on Flickr

 

004 by Mozzer models, on Flickr

 

the roof is the worse part but 2 mins burnishing it will get it smooth

005 by Mozzer models, on Flickr

 

006 by Mozzer models, on Flickr

 

008 by Mozzer models, on Flickr

[chrisjward]

Good evening I have heard you have put the Loco to good use and have better pictures than these, would you please add the better pictures. It helps when people can see the finished result, and they know its easy to burnish the parts.

Thank you, I have tonight started the Glyn Valley Tramway version to be ready for sale at the end of this week

 

Thank you for the publicity you have made on our behalf. It all helps.

best rgds CHRIS

[mozzer models]

Good evening I have heard you have put the Loco to good use and have better pictures than these, would you please add the better pictures. It helps when people can see the finished result, and they know its easy to burnish the parts.

 

Thank you for the publicity you have made on our behalf. It all helps.

best rgds CHRIS

No Problem Chris

 

Here are some photos of the body painted & the chassis fitted with RT Models Valvegear

001 by Mozzer models, on Flickr

002 by Mozzer models, on Flickr

003 by Mozzer models, on Flickr

004 by Mozzer models, on Flickr

 

 

& here it is with a little bit of weathering

001 by Mozzer models, on Flickr

[RThompson]

Patterns for the bogie will be made next week for inclusion in a new mould.