RMweb Premium Andy Hayter Posted June 20, 2021 RMweb Premium Share Posted June 20, 2021 Beautiful work Richard 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted June 21, 2021 RMweb Premium Share Posted June 21, 2021 Richard, When do we get to see the video of them running in a train? Link to post Share on other sites More sharing options...
richard i Posted June 21, 2021 Author Share Posted June 21, 2021 5 hours ago, Clive Mortimore said: Richard, When do we get to see the video of them running in a train? When I get a chance to go to club. That most likely will be late July when I get some time off work. richard 2 Link to post Share on other sites More sharing options...
richard i Posted June 21, 2021 Author Share Posted June 21, 2021 This won as a really quick project. Put transfers on a Southern Pacific AC12 it is N scale the transfers are tiny, however, the most difficult task is reading the white transfers on the sky blue background. how do people read these to make sure that the right one is being cut out? richard 2 Link to post Share on other sites More sharing options...
richard i Posted July 11, 2021 Author Share Posted July 11, 2021 It is done. Transfers and weathering complete. Hopefully it looks in a workaday condition. Next up. Turning this…. into a gcr 2-4-2 thanks, the green Howard’s. let’s see how it goes. richard 5 Link to post Share on other sites More sharing options...
James Harrison Posted July 11, 2021 Share Posted July 11, 2021 Is that the Bachmann 2-4-2 tank? I've got a pair of those myself waiting for that operation too. Link to post Share on other sites More sharing options...
richard i Posted July 12, 2021 Author Share Posted July 12, 2021 22 hours ago, James Harrison said: Is that the Bachmann 2-4-2 tank? I've got a pair of those myself waiting for that operation too. Yes it is. I am going to see how much scratch building is going to be needed. Perhaps not much will be left of the original. We shall see. It should be fun trying though. richard 3 Link to post Share on other sites More sharing options...
richard i Posted July 18, 2021 Author Share Posted July 18, 2021 Cab rear made N5 sides cleaned up and side tank fronts fitted. Small Hand rails fitted. steps next, then to solder all the brass together before nailing it on to the plastic body. that order is important otherwise we end up with a puddle of black plastic. must make sure all soldering is done before marrying it all up together. richard 8 Link to post Share on other sites More sharing options...
richard i Posted July 19, 2021 Author Share Posted July 19, 2021 Much trial and error. trying to work from drawings and then apply to a model being converted. finally got to this. the bunker is too wide by 1 mm which throws the back of the cab out by the same amount. So have added side pieces to the correct width one made. This means the cab sides angle out by half a mm each side from front to back. This looks like it can be hidden by the overhang of the roof. Otherwise a new roof will need to be made. I have painted the cab floor with humbrol 110 and washes to get the wood effect. etched overlays applied with three types of glue. Gorilla, super and two part epoxy in different parts to see which holds up the best. Like I said, trail and error. When I build the next I will have found every pitfall. richard 6 Link to post Share on other sites More sharing options...
James Harrison Posted July 19, 2021 Share Posted July 19, 2021 It never struck me that the side tanks/ cab/ bunker of the N5 are identical to those on the F1/ F2. That changes my plans a little. 1 Link to post Share on other sites More sharing options...
richard i Posted July 19, 2021 Author Share Posted July 19, 2021 1 hour ago, James Harrison said: It never struck me that the side tanks/ cab/ bunker of the N5 are identical to those on the F1/ F2. That changes my plans a little. If you want an early short bunker version you could get away without adjusting the running plate length. That will be what I might try for my other one. Then the conversion may be much simpler. I must look into it when I have finished all the modifications on this one. not me who thought of the n5 connection, that was green Howard’s inspired connection. richard 1 Link to post Share on other sites More sharing options...
richard i Posted July 20, 2021 Author Share Posted July 20, 2021 Bunker rails made Not that the originals, ( in front) were bad, far from it, they were excellent. However they were an LNER fitting and so had to be replaced by the coal rails. they are just placed for the photo. I will need to drill holes to seat them properly. richard 6 Link to post Share on other sites More sharing options...
richard i Posted July 22, 2021 Author Share Posted July 22, 2021 Really starting to come together. hand rail, safety valves and bunker rails fitted. evert time I look and say, “ I am going to need X” I look in the little bag of parts and find it had kindly been left in there when the project was handed over to me. i know for the next stage I will need to build bits: hand brake ( one or two?) fireirons holders x2, a screw reverser and water tank filer lids (oval) - any one got ideas on how to make a good oval 6mm by 3mm by 1mm, I am all ears. how about how to make the blisters on the top edge of the firebox, I need 4 two per side - ideas? richard 7 Link to post Share on other sites More sharing options...
gr.king Posted July 22, 2021 Share Posted July 22, 2021 (edited) Here's a picture of the items (plastic tube about 8mm dia, a round ended drill shank and then the rounded end of some slimmer plastic rod) that I used to create several impressions (as nearly equal as possible) in plasticine that I could then use as a once-only mould in which to cast enough small resin blisters for the shoulders of a 4mm D7 firebox. After pouring the few drops of resin into the mould, the 8mm plastic tube protected by a layer of clear tape was used as the mould top to create the curved backs to the blisters. As for the oval fillers, I'd cut rectangles, then trim off the corners, then patiently file to the truest ovals I could manage. Care, patience and self-critical scrutiny of results pays dividends. Edited July 22, 2021 by gr.king Spelling mistake! 1 Link to post Share on other sites More sharing options...
richard i Posted July 22, 2021 Author Share Posted July 22, 2021 (edited) 1 hour ago, gr.king said: Here's a picture of the items (plastic tube about 8mm dia, a round ended drill shank and then the rounded end of some slimmer plastic rod) that I used to create several impressions (as nearly equal as possible) in plasticine that I could then use as a once-only mould in which to cast enough small resin blisters for the shoulders of a 4mm D7 firebox. After pouring the few drops of resin into the mould, the 8mm plastic tube protected by a layer of clear tap was used as the mould top to create the curved backs to the blisters. As for the oval fillers, I'd cut rectangles, then trim of the corners, then patiently file to the truest ovals I could manage. Care, patience and self-critical scrutiny of results pays dividends. Thanks this gives much food for thought. I might go the other way and press a mounding onto another firebox then cast off that. Let’s see how that goes. I have been watching your D7 build with interest. If you ever do castings off it there would certainly be one interested person here. Richard Edited July 22, 2021 by richard i 1 Link to post Share on other sites More sharing options...
gr.king Posted July 22, 2021 Share Posted July 22, 2021 Copying a good set off an existing firebox would certainly be easier, if you have such a firebox. Interest noted. 1 Link to post Share on other sites More sharing options...
richard i Posted July 23, 2021 Author Share Posted July 23, 2021 The little pieces made. hand brake, fire iron supports, lamp brackets, and screw reverser. That has the tread wound in and needs its body made. It won’t be 100% accurate but it will be tucked inside the cab. I might fit some cab doors, then it feels like the chassis needs looking at. I might just use the one from my own L&Y tank and then play around with this one when I look to convert that one. The motor does not fit easily into this one and it is too far down the track for serious butchery. richard 9 Link to post Share on other sites More sharing options...
Keith Turbutt Posted August 2, 2021 Share Posted August 2, 2021 Hi Richard, Here's a short video of this afternoons session. Clearly I need more practise so please bring everything along again next week. Also missing the view of the other side of the carriages - must have had the video in the 'off'/stop' position. Cheers Keith 5 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted August 2, 2021 RMweb Premium Share Posted August 2, 2021 (edited) 21 minutes ago, Keith Turbutt said: Hi Richard, Here's a short video of this afternoons session. Clearly I need more practise so please bring everything along again next week. Also missing the view of the other side of the carriages - must have had the video in the 'off'/stop' position. Cheers Keith Hi Keith Is that the club's test track your layout? Cor you have been busy. Edited August 2, 2021 by Clive Mortimore Link to post Share on other sites More sharing options...
Keith Turbutt Posted August 3, 2021 Share Posted August 3, 2021 Good morning Clive. No, not a layout ... yet. Still just two tracks around the garage enabling decent length trains to be run. I had to lift some track and all points/turnouts to fit in the Backmann Scenecraft GC station. In fact only one track completed at the moment so really work in progress. But it was great to see Richard's train going round and through the station. It gave him the opportunity to test the running of his coaches which he can't do at home and do a bit of tweeking. Watch this space! Cheers Keith 2 1 Link to post Share on other sites More sharing options...
richard i Posted August 3, 2021 Author Share Posted August 3, 2021 A bit of tweeking! Lots of it. kit built things need lots of final fettling to get them to run smoothly. I am so grateful to have access to the layout in Keith’s garage. He has seen the light and realized that the GC allows you to run so much variety of stock legitimately. It also has simple station layouts to watch the trains go by thought a little scenery. one carriage did not make the cut. I have played around with the bogie so hopefully it can make its cinamagraphic debut. I hope it is resolved as it is my favorite of all of them. will bring the book of station plans down too. thank you for use of the track. richard 4 Link to post Share on other sites More sharing options...
richard i Posted August 4, 2021 Author Share Posted August 4, 2021 Starting to get to the end of the jobs list. have made the frame extender for the rear. It is three levels made separately and each of a different shape then brought together to make the complex shape. the firebox has been smoothed off so the bands can be put on in the correct place. Farme extension just visible behind rear guard irons. seems firebox lumps and pipes below the cab are the only things left. ( I know such technical terms.) richard 7 Link to post Share on other sites More sharing options...
RMweb Premium t-b-g Posted August 4, 2021 RMweb Premium Share Posted August 4, 2021 47 minutes ago, richard i said: Starting to get to the end of the jobs list. have made the frame extender for the rear. It is three levels made separately and each of a different shape then brought together to make the complex shape. the firebox has been smoothed off so the bands can be put on in the correct place. Farme extension just visible behind rear guard irons. seems firebox lumps and pipes below the cab are the only things left. ( I know such technical terms.) richard Depending on the period you wish to represent, you may not need to fit the rounded covers on the top corners of the firebox. There are lots of photos of locos in the early GCR period with Belpaire fireboxes with no sign of anything there. The only thing I don't know is when they started fitting them and how quickly they were all done but there are photos of the 2-4-2 and 0-6-2 tanks without them. As your carriage livery choices are early period you could easily justify not adding them. 1 Link to post Share on other sites More sharing options...
richard i Posted August 4, 2021 Author Share Posted August 4, 2021 3 hours ago, t-b-g said: Depending on the period you wish to represent, you may not need to fit the rounded covers on the top corners of the firebox. There are lots of photos of locos in the early GCR period with Belpaire fireboxes with no sign of anything there. The only thing I don't know is when they started fitting them and how quickly they were all done but there are photos of the 2-4-2 and 0-6-2 tanks without them. As your carriage livery choices are early period you could easily justify not adding them. That is good to know. I will look again, but feel I might have to. I am having carriages in all three livery so having them might give flexibility. I have been ummming ans ahhhhring over the chimney and have finally settled that it is 2mm too short. Now I have decided this I will have to address it though I hope the cut and shut will not be noticeable as a cut and shut. I am intending to make another 2-4-2 with round top firebox for variety sake which will cover the earlier period more. Anther reason to fit the lumps on the boiler sides of this one. richard 1 Link to post Share on other sites More sharing options...
James Harrison Posted August 4, 2021 Share Posted August 4, 2021 At least one of them made it to LNER days with a round top firebox. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now