RMweb Premium St Enodoc Posted November 23, 2019 Author RMweb Premium Share Posted November 23, 2019 (edited) I've ordered from Kernow (on Veronica's behalf, as it will be a Christmas present) a Hornby "Earl of St Germans", at over 40% off. That will become a new 5058 Earl of Clancarty replacing my detailed tender-drive Airfix model, which is suffering from the passage of time (nearly 40 years). In turn, the loco chassis from that will go under 4099 Kilgerran Castle (also Airfix but slightly younger) as 4099's original driving wheels refuse to go round any more, which does make it look rather odd when it's going along. Don't mention it too loudly but the Hornby loco has TTS sound. I'll need to find a way to disable that. Edited November 23, 2019 by St Enodoc 5 1 Link to post Share on other sites More sharing options...
RMweb Premium TrevorP1 Posted November 23, 2019 RMweb Premium Share Posted November 23, 2019 14 minutes ago, St Enodoc said: I've ordered from Kernow (on Veronica's behalf, as it will be a Christmas present) a Hornby "Earl of St Germans", at over 40% off. That will become a new 5058 Earl of Clancarty .... Don’t tempt me John! 2 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted November 23, 2019 RMweb Premium Share Posted November 23, 2019 35 minutes ago, St Enodoc said: I've ordered from Kernow (on Veronica's behalf, as it will be a Christmas present) a Hornby "Earl of St Germans", at over 40% off. That will become a new 5058 Earl of Clancarty replacing my detailed tender-drive Airfix model, which is suffering from the passage of time (nearly 40 years). In turn, the loco chassis from that will go under 4099 Kilgerran Castle (also Airfix but slightly younger) as 4099's original driving wheels refuse to go round any more, which does make it look rather odd when it's going along. Don't mention it too loudly but the Hornby loco has TTS sound. I'll need to find a way to disable that. Hi UDJ As a engineer I am sure you will find away of disabling the TTS a wee bit more sophisticated than cutting the wires and throwing the chip in the bin. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 24, 2019 Author RMweb Premium Share Posted November 24, 2019 2 hours ago, Clive Mortimore said: Hi UDJ As a engineer I am sure you will find away of disabling the TTS a wee bit more sophisticated than cutting the wires and throwing the chip in the bin. Cutting the wires is an option as long as removing the speaker load doesn't cause problems. I probably won't throw the chip in the bin as if I did I'd have to buy another. 2 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 24, 2019 Author RMweb Premium Share Posted November 24, 2019 One of my modified Lima Siphon G's had some slight damage to the roof paint where I had messed up the painting and the sprayed maroon was showing through a chip in the grey roof. I'd hidden it with the Post-It note set number but since removing those last weekend of course it was exposed to view, so yesterday I repainted the whole roof, using Railmatch 313 pale grey roof paint. Unfortunately this dried glossy instead of dull, so today I brushed a coat of Humbrol Mattcote on. Guess what - that's dried glossy too. I'll have a mooch around one or two hobby shops this week but in the meantime I thought I'd ask what brushing matt varnish other folk use. Ideally not a Phoenix or Railmatch variety, as these are completely unobtainable in Australia, but we can get Humbrol and most of the American and Japanese brands. I could spray the roof but can't be bothered to mask the rest of the body up. What do you suggest? 1 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 24, 2019 RMweb Premium Share Posted November 24, 2019 Sometime back I was getting really fed up with Humbrol Matt varnish drying glossy, so I sent a can back to Humbrol with a moaning letter. Very nice lab technician came back, with a sample done from my can, done flat finish. She says the secret is to do a very thorough stir, and then stir for some more. The flatness comes from the little particles in the sludge, and they must be evenly in suspension to succeed. 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted November 24, 2019 RMweb Premium Share Posted November 24, 2019 14 minutes ago, Northroader said: Sometime back I was getting really fed up with Humbrol Matt varnish drying glossy, so I sent a can back to Humbrol with a moaning letter. Very nice lab technician came back, with a sample done from my can, done flat finish. She says the secret is to do a very thorough stir, and then stir for some more. The flatness comes from the little particles in the sludge, and they must be evenly in suspension to succeed. That is a very polite way of saying " It's your own fault matey". 2 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted November 24, 2019 RMweb Gold Share Posted November 24, 2019 17 minutes ago, Northroader said: Sometime back I was getting really fed up with Humbrol Matt varnish drying glossy, so I sent a can back to Humbrol with a moaning letter. Very nice lab technician came back, with a sample done from my can, done flat finish. She says the secret is to do a very thorough stir, and then stir for some more. The flatness comes from the little particles in the sludge, and they must be evenly in suspension to succeed. 2 minutes ago, Clive Mortimore said: That is a very polite way of saying " It's your own fault matey". ...and Clive knows all about stirring... 3 6 Link to post Share on other sites More sharing options...
DougN Posted November 24, 2019 Share Posted November 24, 2019 I have had great success with the tamiya spray packs. So this might be a good option. 1 Link to post Share on other sites More sharing options...
RMweb Gold 5BarVT Posted November 24, 2019 RMweb Gold Share Posted November 24, 2019 16 minutes ago, Clive Mortimore said: That is a very polite way of saying " It's your own fault matey". But at least it had a positive suggestion with it. :-) 1 Link to post Share on other sites More sharing options...
Ashley Bridge Posted November 24, 2019 Share Posted November 24, 2019 I found this out too, you need to really stir all the sludge up from the bottom of the tin. That’s the good bit, unlike red wine or port. Rich 1 Link to post Share on other sites More sharing options...
Denbridge Posted November 24, 2019 Share Posted November 24, 2019 6 hours ago, St Enodoc said: One of my modified Lima Siphon G's had some slight damage to the roof paint where I had messed up the painting and the sprayed maroon was showing through a chip in the grey roof. I'd hidden it with the Post-It note set number but since removing those last weekend of course it was exposed to view, so yesterday I repainted the whole roof, using Railmatch 313 pale grey roof paint. Unfortunately this dried glossy instead of dull, so today I brushed a coat of Humbrol Mattcote on. Guess what - that's dried glossy too. I'll have a mooch around one or two hobby shops this week but in the meantime I thought I'd ask what brushing matt varnish other folk use. Ideally not a Phoenix or Railmatch variety, as these are completely unobtainable in Australia, but we can get Humbrol and most of the American and Japanese brands. I could spray the roof but can't be bothered to mask the rest of the body up. What do you suggest? Simple. Ronseal. As used by Ian Rathbone, the late Guy Williams and many more. 1 Link to post Share on other sites More sharing options...
nerron Posted November 24, 2019 Share Posted November 24, 2019 11 hours ago, DougN said: I have had great success with the tamiya spray packs. So this might be a good option. Same here. Their Matt Clear is excellent. 1 Link to post Share on other sites More sharing options...
RMweb Gold The Fatadder Posted November 24, 2019 RMweb Gold Share Posted November 24, 2019 (edited) 15 hours ago, St Enodoc said: I could spray the roof but can't be bothered to mask the rest of the body up. What do you suggest? Not really answering the question but.... I use Vallejo grey black for coach roofs, which I have found once set doesn’t need varnishing. Might be worth a try though no idea if it’s available in Australia, but it’s acrylic so shouldn’t be any issue posting. Edited November 24, 2019 by The Fatadder 1 1 1 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 25, 2019 Author RMweb Premium Share Posted November 25, 2019 15 hours ago, DougN said: I have had great success with the tamiya spray packs. So this might be a good option. Thanks Doug. When I'm in the mood to spray I use Testor's Dullcote or, for larger areas, Wattyl Polyurethane Matt. This is about when I don't want the palaver of masking up or going outside and just want a five-minute brush job 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 25, 2019 Author RMweb Premium Share Posted November 25, 2019 12 hours ago, Ashley Bridge said: I found this out too, you need to really stir all the sludge up from the bottom of the tin. That’s the good bit, unlike red wine or port. Rich I agree (this is a clear jar not a tin though). However, yesterday there was not much sludge to stir. Perhaps the jar was too old. Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 25, 2019 Author RMweb Premium Share Posted November 25, 2019 2 hours ago, The Fatadder said: Not really answering the question but.... I use Vallejo grey black for coach roofs, which I have found once set doesn’t need varnishing. Might be worth a try though no idea if it’s available in Australia, but it’s acrylic so shouldn’t be any issue posting. Thanks Rich. I use various colours to give a bit of variation. In this case I wanted a pale grey to match, more or less, the grey primer underneath With the time it's taken I'd have been quicker masking up and spraying more primer on the roof. Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 25, 2019 Author RMweb Premium Share Posted November 25, 2019 11 hours ago, Denbridge said: Simple. Ronseal. As used by Ian Rathbone, the late Guy Williams and many more. Thanks. I'll see if that's available here under the Ronseal name or otherwise. Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted November 25, 2019 Author RMweb Premium Share Posted November 25, 2019 15 hours ago, Denbridge said: Simple. Ronseal. As used by Ian Rathbone, the late Guy Williams and many more. 6 hours ago, The Fatadder said: Not really answering the question but.... I use Vallejo grey black for coach roofs, which I have found once set doesn’t need varnishing. Might be worth a try though no idea if it’s available in Australia, but it’s acrylic so shouldn’t be any issue posting. Can't find any Ronseal products listed as available in Australia. I know I can get Vallejo, Testors, Tamiya and MIG (matt and ultra matt) varnish/lacquer. Any recommendations, positive or negative? Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted November 25, 2019 RMweb Premium Share Posted November 25, 2019 Just add a bit of weathering over the damaged area.. You can use Tamiya brush on matt acrylic varnish. They do a veriety of varnish types and finishes. Baz 1 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted November 25, 2019 RMweb Gold Share Posted November 25, 2019 "Ah, g'day, mate. I see your Siphon G has a glossy roof?" "Yeah, mate, loacollized rain." 2 1 Link to post Share on other sites More sharing options...
Denbridge Posted November 25, 2019 Share Posted November 25, 2019 4 hours ago, St Enodoc said: Can't find any Ronseal products listed as available in Australia. I know I can get Vallejo, Testors, Tamiya and MIG (matt and ultra matt) varnish/lacquer. Any recommendations, positive or negative? Ronseal is a decorating product, rather than a modelling one. I buy it from my local DIY store. 1 Link to post Share on other sites More sharing options...
DougN Posted November 25, 2019 Share Posted November 25, 2019 Denbridge, I have had a quick look Ronseal products are generally not available here in Aus. This is one of the many issues that turns up with hardware in the UK VS Australia. One item which I have read many times is in the UK you would never use MDF (medium density fibre board), however we have a very good MDF here in Australia which is a higher density and works very well for layouts. we for instance don't get Sundela but a long time ago we could access Caneite which was similar but most people wouldn't touch with a barge pole as it was compressed sugarcane waste, good for pin boards but not much else! 1 1 Link to post Share on other sites More sharing options...
Denbridge Posted November 25, 2019 Share Posted November 25, 2019 3 hours ago, DougN said: Denbridge, I have had a quick look Ronseal products are generally not available here in Aus. This is one of the many issues that turns up with hardware in the UK VS Australia. One item which I have read many times is in the UK you would never use MDF (medium density fibre board), however we have a very good MDF here in Australia which is a higher density and works very well for layouts. we for instance don't get Sundela but a long time ago we could access Caneite which was similar but most people wouldn't touch with a barge pole as it was compressed sugarcane waste, good for pin boards but not much else! That's a shame. Perhaps an equivalent DIY product would work. Ever since this tip, I've never used any modelling varnished. And, unlike those, ronseal is always consistent. Link to post Share on other sites More sharing options...
RMweb Premium Chamby Posted November 25, 2019 RMweb Premium Share Posted November 25, 2019 I use Humbrol’s mattcote to good effect, but it does need a bl**dy good stir as it is the sludgy stuff at the bottom of the jar that turns the varnish matt. Satincote is the same, it just has less sludge... 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now