Jump to content
 

"DUCHESS OF SUTHERLAND" of cardboard


Recommended Posts

Hello,

Phil, I'm not going to go Wolsztyn. I prefer shows in Chabowka, suppose you heard about it. It is much closer to me.

robertc rivets I make of card, how it is made you can see below

 

th_P1070777_zps0c62c04b.jpg  th_P1070778_zps345fac7c.jpg post-25893-0-29684900-1537038433.jpg post-25893-0-15820900-1537038385.jpg

 

 

 

 

It is importand to find good quality card to avoid stratifying elements.

 

Regards

Mirek

Edited by Mirmic
  • Like 2
Link to post
Share on other sites

  • 2 weeks later...

My flabber is completely gasted.

Awesome work and very inspirational.

I used to think card models were inferior to other methods, but since I downloaded one of scalescenes free kits I had suspected much greater things were possible, this proves that to be more true than I had imagined

Thanks for sharing.

Link to post
Share on other sites

  • 2 months later...

Hello Dear All,

In the last time I prepared pipe connection for heating system for coaches,  

 

post-25893-0-24296500-1537039038_thumb.jpg post-25893-0-93078700-1537039056_thumb.jpg

 

and foot steps of front of tender

 

post-25893-0-37052400-1537039078_thumb.jpg

post-25893-0-36131800-1537039114_thumb.jpg

post-25893-0-96904700-1537039137_thumb.jpg

post-25893-0-80642300-1537039154_thumb.jpg

 

  

 

Rgds

Mirek

Edited by Mirmic
  • Like 2
Link to post
Share on other sites

It's really good to see more updates from you Mirek.  That heating pipe alone is a thing of beauty.  Please tell me that the supporting spring is a real spring; you surely haven't devised a way to make that so realistic out of card?

 

Regards

 

Phil

Link to post
Share on other sites

  • 2 weeks later...
  • 1 month later...

Hello,

Area for printing was filled:

post-25893-0-66774200-1498983413_thumb.jpg

After changing color of lines in layer for black was made printout:

post-25893-0-32673100-1498983448_thumb.jpg

Printout is on card 180 g/sqm thikness around 0.23 mm

I need color and textures on both sides of elements then it is sticked by contact neoprene glue, I use Bison contact glue.

Final thicknes of printed elements should be 0.5 mm.

post-25893-0-62422500-1498983469_thumb.jpg

 

Next step will be cut elements and asembled them.

Now is prepared around 30% of elements of frame.

 

Cheers

Mirek

Edited by Mirmic
  • Like 1
Link to post
Share on other sites

Hello,

Today bolster where is axle of Bissel's truck.

 

Hand cut elements

 

post-25893-0-67137300-1537039447_thumb.jpg

 

 

Assembled elements

 

post-25893-0-43985500-1537039471_thumb.jpg

 

 

element after painting

 

post-25893-0-77438000-1537039488_thumb.jpg

post-25893-0-86458300-1537039527_thumb.jpg

 

and together with Bissel's truck

 

post-25893-0-70983100-1537039507_thumb.jpg

 

 

 

Rgds

Mirek

Edited by Mirmic
  • Like 1
Link to post
Share on other sites

Hello visitors,

olivegreen, trainmaster247 thanks a lot!

 

let's continue a construction of frame..

 

today first bolster after leading boogie, with brake shaft and brake levers,

 

P1090987_zpsymb8ynmf.jpg  

 

P1090988_zpsff5p8mmo.jpg

 

P1090989_zpswladxvta.jpg

 

P1090993_zpst5fblw5a.jpg

 

P1090997_zpsuentv2pw.jpg

 

P1090998_zps0yeycb84.jpg

 

and front buffer beam

 

P1100001_zpspeijf4fp.jpg

 

P1100005_zpsgugdbg03.jpg

 

P1100006_zps1s5xeq3q.jpg

 

front buffers:

 

P1100009_zpsumipcgj2.jpg

 

drawbar and hook:

 

P1100010_zpssvdaciqh.jpg

 

 

buffer beam I built two times because of mistake in dimensions of elements  :scratchhead:

 

P1100004_zpsksfsdckj.jpg

 

I'll be very apreciate if somebody correct me when I would mistake in name of elemets  :mail:

 

rgds

Mirek

Link to post
Share on other sites

Hello Dear All,

 

I know that it is bored but frame of 241P has many bolsters and reinforcements  :scratchhead:.

 

Then continue..

 

reinforcements close to axle of inner (high pressure) engine.

 

P1100013_zpscvum9kxe.jpg  P1100014_zpsisfljub6.jpg  P1100027_zpsnqxbaszk.jpg  P1100028_zpssmewzh3m.jpg

 

reinforcements and bolsters close to axle of outside (low pressure) engine:

 

P1100016_zpsqz5wlm75.jpg  P1100017_zpsklvrexbl.jpg  P1100024_zpstg0dzjla.jpg  P1100030_zpsbreiltqq.jpg  P1100029_zpsygnkbcvh.jpg  P1100034_zps8gmqobca.jpg

 

cheers

Mirek

  • Like 1
Link to post
Share on other sites

Hi Mirek

 

I for one am most definitely NOT bored by watching your build in such detail. I am very much enjoying this model come together one piece at a time, and I look forward to each update.

 

Cheers

 

Phil

 

Edit: to correct my autocorrect!

Edited by Phil Howe
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...