LNERJP Posted April 13, 2016 Share Posted April 13, 2016 Hi All I'm building a 7mm VDA wagon in Bauxite, and need information on what all the lettering says on the side of wagon and underframe. To help me place the correct transfers in the correct place. I used to have some very detailed pic's but lost them when my computer got a virus, and non of the pictures on web have enough definition to make out what it all says. thanks J.P. Link to post Share on other sites More sharing options...
Fat Controller Posted April 13, 2016 Share Posted April 13, 2016 I'm not sure, but I believe Paul Bartlett's site offers the possibility of buying large prints of the slides on his site. The site advises that those images with a reference ending in 'M' are low quality scans. Link to post Share on other sites More sharing options...
Lord Flashheart Posted April 13, 2016 Share Posted April 13, 2016 When I built mine i had a similar problem so used a Bachmann one as reference, used Appleby Mode Engineering transfers and they had everything on that the Bachmann one did, not saying it's 100% correct but looks the part to me. Is it the PRMRP kit your doing?. Rob Link to post Share on other sites More sharing options...
LNERJP Posted April 13, 2016 Author Share Posted April 13, 2016 I'm not sure, but I believe Paul Bartlett's site offers the possibility of buying large prints of the slides on his site. The site advises that those images with a reference ending in 'M' are low quality scans. Already have the P Bartlett pic for the wagon I am building, but the resolution is still not quite high enough to see. J.P. Link to post Share on other sites More sharing options...
LNERJP Posted April 13, 2016 Author Share Posted April 13, 2016 When I built mine i had a similar problem so used a Bachmann one as reference, used Appleby Mode Engineering transfers and they had everything on that the Bachmann one did, not saying it's 100% correct but looks the part to me. Is it the PRMRP kit your doing?. Hi Rob Yes it's the PRMRP kit, fully sprung in S7, here's the last one I did http://www.rmweb.co.uk/community/index.php?/topic/57784-prmrp-vda-van-kit/ . Also using Appleby transfers, they are superb. J.P. Link to post Share on other sites More sharing options...
Lord Flashheart Posted April 13, 2016 Share Posted April 13, 2016 That's very nicely done J P, the VDA was the first brass kit I built and I thoroughly enjoyed it, so much so I've just got another to do. Rob Link to post Share on other sites More sharing options...
mike hughes Posted April 16, 2016 Share Posted April 16, 2016 Hope these are of help Michael Link to post Share on other sites More sharing options...
hmrspaul Posted April 16, 2016 Share Posted April 16, 2016 Already have the P Bartlett pic for the wagon I am building, but the resolution is still not quite high enough to see. J.P. Tell me which one it is and I'll rescan at high resolution and send to you (if you let me have email address). A lot of my collection was scanned for Fotopic before broadband was thought of let along something available to domestic users! Paul Link to post Share on other sites More sharing options...
LNERJP Posted April 17, 2016 Author Share Posted April 17, 2016 That's a help thanks Michael. PM on way Paul, very kind thank you. J.P. Link to post Share on other sites More sharing options...
JohnH Posted April 18, 2016 Share Posted April 18, 2016 Hope these are of help Michael Brilliant Michael - are these official BR drawings? Link to post Share on other sites More sharing options...
mike hughes Posted April 18, 2016 Share Posted April 18, 2016 Brilliant Michael - are these official BR drawings? Yes it's either the GA drawing or the Painting and lettering diagram of the VDA Michael Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.