faa77 Posted July 16, 2016 Share Posted July 16, 2016 Hi, my Bachmann 37 (David Lloyd George) runs on analogue. Both cabins have lights and these work but the read/forward lights only work at one end (the same end). What should I check? Link to comment Share on other sites More sharing options...
drewn Posted July 17, 2016 Share Posted July 17, 2016 Fist of al;l check that the body is properly seated on the chasis, sometimes overtightening of the fixing screws causes such a problem Link to comment Share on other sites More sharing options...
Waverley West Posted July 17, 2016 Share Posted July 17, 2016 Fist of al;l check that the body is properly seated on the chasis, sometimes overtightening of the fixing screws causes such a problem If that doesn't work, remove the body and make sure the three contact tabs inside the nose are not distorted. It's a common problem if the body has previously been removed. Well, it is for me anyway. Link to comment Share on other sites More sharing options...
rob D2 Posted July 18, 2016 Share Posted July 18, 2016 I agree with the above posts. Sometimes I have to tighten the screws a little further than I'd like to get enough contact with the metal strips to get the lights on Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.