wsrbloke Posted June 4, 2017 Share Posted June 4, 2017 Hi guys, I'm going to try and 3d print a vehicle in 1/32 (10mm) scale from .stl files of a model that is 1/29 scale. My question to you is, what percentage should I set the print at to obtain the required scale? Your help would be much appreciated. Thanks in advance. Ron Link to comment Share on other sites More sharing options...
Arun Sharma Posted June 4, 2017 Share Posted June 4, 2017 The answer to your question is : 29/32 =0.906 = 90.6% Link to comment Share on other sites More sharing options...
HSB Posted June 5, 2017 Share Posted June 5, 2017 10mm scale is approximately 1/30.5 . While most British Gauge 1 modellers used 10mm scale in the past the tendency is now to use 1/32 . Link to comment Share on other sites More sharing options...
wsrbloke Posted June 5, 2017 Author Share Posted June 5, 2017 hey Ted, thank you so much for your help. Ron Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.