Shedmaster 47 Posted December 1, 2017 Share Posted December 1, 2017 Hi Folks I have a NCE powercab system and have asked on the forum here if I can use a second powercab handset Purley as a throttle using the coiled cable...??? All replies said that I should be able to do so .. HOWEVER I can't get my second cab to power a loco !! It lights up etc ( Ave even changed its address to NO 3 ) but it just won't do anything !! Its plugged into the same master panel as the main powercab handset ( red led type)... Is this my problem??? HELP...many thanks .. Link to comment Share on other sites More sharing options...
10000 Posted December 1, 2017 Share Posted December 1, 2017 I suggest you read this page. https://ncedcc.zendesk.com/hc/en-us/articles/203244199-Two-Power-Cabs-on-the-same-layout Link to comment Share on other sites More sharing options...
Shedmaster 47 Posted December 1, 2017 Author Share Posted December 1, 2017 Thanks 10, 000 My problem is that only One of my handsets is the new 1:65 version. The other cab is the older 1:28 edition . SO ...I will need to buy a new chip to upgrade my second cab.. Many thanks for your help Allan Link to comment Share on other sites More sharing options...
Pete the Elaner Posted December 1, 2017 Share Posted December 1, 2017 Why have you started a new thread for this when your other one is still active? Link to comment Share on other sites More sharing options...
Recommended Posts