TurboSnail Posted October 1, 2020 Author Share Posted October 1, 2020 (edited) 7 hours ago, Edwardian said: Is there any prospect of a 3D O1 body with the Oxford chassis in mind? Potentially, but not for a while, I'm afraid. I'm still doing test building with the R (on which the O CAD is based), and @Skinnylinny is test building the O. Once those are both done, then the O1 could follow, but isn't a high priority as the other kit already exists. I'm also still trying to offload printing onto someone else - my printer is still pretty unreliable and it's more difficult to get high-enough quality models out of it now than it used to be (I have had to remind myself several times lately that this is a hobby, not a job). But I'm sure I'll get there eventually. Edited October 1, 2020 by TurboSnail 1 3 Link to comment Share on other sites More sharing options...
wainwright1 Posted October 2, 2020 Share Posted October 2, 2020 Keep up the good work. Ray 3 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 4, 2020 Author Share Posted October 4, 2020 The little Avonside progressess... It also has a new motor and a flywheel for fun. I've since spent most of today adding handrails to this and a couple of other projects that I'm not showing off just yet, so I'm utterly sick of 0.45mm handrail wire and superglued fingers. 9 Link to comment Share on other sites More sharing options...
Gibbo675 Posted October 4, 2020 Share Posted October 4, 2020 11 minutes ago, TurboSnail said: The little Avonside progressess... It also has a new motor and a flywheel for fun. I've since spent most of today adding handrails to this and a couple of other projects that I'm not showing off just yet, so I'm utterly sick of 0.45mm handrail wire and superglued fingers. Hi Tom, Look on the bright side super glue was developed to glue skin together instead of using stitches. Gibbo. 3 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 5, 2020 Author Share Posted October 5, 2020 And I can confirm it is excellent at it's job! The remaining jobs are more fun - planning to try and get the main colour painted during a tea break today. Some people complain about working from home, but it does have the advantage of being able to take mini modelling breaks a couple of times a day. Especially if it's a quick job that you then have to leave to dry 2 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 10, 2020 Author Share Posted October 10, 2020 Today's pre-grouping activity is messing with a C Class - they do like to make modern locos out of lots of separate bits, don't they? Hopefully I can remember which bits go where... Anyway, when I'm done with this loco, it'll be a different colour, which leads me to a plea for help. Does anyone know which sheds C Classes might have been allocated to in the Folkestone area? During and just after The Great War. I need to find a suitable identity for it once repainted, and I'd like it to be a local one. 4 Link to comment Share on other sites More sharing options...
Tom Burnham Posted October 10, 2020 Share Posted October 10, 2020 D L Bradley ("The locomotive history of the SE&CR") doesn't give complete allocation details, however Folkestone Junction doesn't seem to have had any C class (possibly ever). Allocations when new included Dover (63, 113, 191, 219, 256, 257, 681, 682, 683) and Ashford (38, 102, 298) - don't you just love SE&CR numbering. He says that up to 1925 "the allocation had not changed greatly over the years", although as Ashford then had 9 of the class and Dover 6, there had evidently been some changes. By 1925 they were being superseded on the heavier goods trains by N class 260s, but not many Ns will have appeared by your period. In the post-WW1 period, they were increasingly used for passenger trains (particularly excursions, hop-pickers' specials and such like) as well as goods, so it's a very useful choice of engine. 2 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 10, 2020 Author Share Posted October 10, 2020 17 minutes ago, Tom Burnham said: Allocations when new included Dover (63, 113, 191, 219, 256, 257, 681, 682, 683) and Ashford (38, 102, 298) - don't you just love SE&CR numbering. That's fantastic, thanks very much! I'll probably pick one of the Dover ones. I think Folkestone shed was mainly Rs and Os for the Harbour branch, so likely that they wouldn't have been kept there. 256 was a long-lived one (1900-1961), built at Ashford, so I think I'll go with that one. 1 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 11, 2020 Author Share Posted October 11, 2020 The C Class is almost back from the paint shop, just the tender footplate and wheels to go, plus some details in red and brass to pick out. 7 2 Link to comment Share on other sites More sharing options...
Edwardian Posted October 13, 2020 Share Posted October 13, 2020 On 10/10/2020 at 20:31, TurboSnail said: That's fantastic, thanks very much! I'll probably pick one of the Dover ones. I think Folkestone shed was mainly Rs and Os for the Harbour branch, so likely that they wouldn't have been kept there. 256 was a long-lived one (1900-1961), built at Ashford, so I think I'll go with that one. Careful with the font (I've just argued, I believe successfully, for it to be changed on the new D Class), the 2 is one of the giveaway numbers. Lovely work. 1 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 13, 2020 Author Share Posted October 13, 2020 24 minutes ago, Edwardian said: Careful with the font (I've just argued, I believe successfully, for it to be changed on the new D Class), the 2 is one of the giveaway numbers. Lovely work. The transfers I've got are Southern style technically, but I think they're close. I'll check before I apply them, and if not, I'll pick a less controversial number! 1 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 19, 2020 Author Share Posted October 19, 2020 This weekend's work was this little wagon - a bit of a curiosity from the Swedish and Norwegian Railway. The hopper design might look fairly modern(ish), but it's a design from 1885(!) built by BRCW with the drawings I used featuring in an article in The Engineer from 1888. I picked up an original version of the drawings off eBay - no idea if it's genuine, but no real reason to doubt it, but it's certainly an odd experience using a piece of paper that's at least 5x older than I am to construct a model to be 3D printed with very modern technology... The wagon is tiny, by the way - approx. 60mm long and 28mm wide in OO. That combination of small size and the 6-wheel chassis is what drew me to it. I think I'll make a couple for a diorama of the Channel Steel Co. Ltd. at some point (a real company that almost started mining iron ore from the abandoned original channel tunnel workings). 4 1 1 Link to comment Share on other sites More sharing options...
TurboSnail Posted October 29, 2020 Author Share Posted October 29, 2020 Some wheels turned up today, so a little wagon work has happened. Centre axle positioning still needs some work, but otherwise pretty happy with it. 7 3 Link to comment Share on other sites More sharing options...
TurboSnail Posted November 10, 2020 Author Share Posted November 10, 2020 The first test print of a Ruston overtype loco is promising - the body itself hasn't come out that well and needs re-printing, but it fits the chassis and all the details seem to have worked. Some of the moving parts will be re-made in more appropriate materials once I've checked all the sizing is ok. 11 3 Link to comment Share on other sites More sharing options...
LNWR18901910 Posted November 11, 2020 Share Posted November 11, 2020 On 29/10/2020 at 21:50, TurboSnail said: Some wheels turned up today, so a little wagon work has happened. Centre axle positioning still needs some work, but otherwise pretty happy with it. Perfect for a Pre-Grouping tri-axle mineral wagon! Where can I find such a body? 1 Link to comment Share on other sites More sharing options...
TurboSnail Posted November 11, 2020 Author Share Posted November 11, 2020 12 minutes ago, LNWR18901910 said: Perfect for a Pre-Grouping tri-axle mineral wagon! Where can I find such a body? It's one I've designed myself, it's not available yet as I need to finish building it and checking it works properly, but I'm hoping to make it available to buy soon. 3 Link to comment Share on other sites More sharing options...
Edwardian Posted November 11, 2020 Share Posted November 11, 2020 7 hours ago, TurboSnail said: It's one I've designed myself, it's not available yet as I need to finish building it and checking it works properly, but I'm hoping to make it available to buy soon. In which case, I very much doubt that the Norfolk Minerals railway could resist! 4 Link to comment Share on other sites More sharing options...
TurboSnail Posted November 12, 2020 Author Share Posted November 12, 2020 A little progress update on another project! This is just testing with a 9V battery, yet to test slow speed running. The chassis needs a little tweaking, then I need to print a new body as this one has a few print quality issues. Then to really test my sanity and see if I can get the motion working... 8 3 Link to comment Share on other sites More sharing options...
TurboSnail Posted November 20, 2020 Author Share Posted November 20, 2020 (edited) The Channel Steel fleet is coming together nicely, I need to build a couple more of the wagons but I'm happy the design works now (transfers kindly provided by @Corbs). Still need to think of some kind of mini diorama or shelf layout for these to run on... maybe I should have thought about that before building them! The Peckett can make occasional appearances on my main layout but I'd like to reserve the Pugbash for something a bit different. I'll go and brainstorm some ideas Edited November 20, 2020 by TurboSnail 8 1 1 Link to comment Share on other sites More sharing options...
Edwardian Posted November 20, 2020 Share Posted November 20, 2020 Great stuff. Bravo! 1 2 1 Link to comment Share on other sites More sharing options...
Edwardian Posted November 20, 2020 Share Posted November 20, 2020 Sorry, I was mad-busy and fighting with poor internet, so now I'll say something more. I really love what you've done. It's great to have a fresh take on the Hornby Peckett, by a cunning conversion to a more modern design. I love the cabless tank. It has bags of character and looks so right. I also believe that grey is an underrated livery for locomotives and it works really well here. Black suits the wagon perfectly. I think the lettering is spot-on and thoroughly convincing. The lettering on the locos is similarly appropriate. All in all great examples of the sort of modelling I love to see. 3 2 Link to comment Share on other sites More sharing options...
TurboSnail Posted November 20, 2020 Author Share Posted November 20, 2020 2 hours ago, Edwardian said: Sorry, I was mad-busy and fighting with poor internet, so now I'll say something more. I really love what you've done. It's great to have a fresh take on the Hornby Peckett, by a cunning conversion to a more modern design. I love the cabless tank. It has bags of character and looks so right. I also believe that grey is an underrated livery for locomotives and it works really well here. Black suits the wagon perfectly. I think the lettering is spot-on and thoroughly convincing. The lettering on the locos is similarly appropriate. All in all great examples of the sort of modelling I love to see. Thanks! That means a lot knowing your meticulous eye for detail Is the Peckett cab a more modern design? I'd thought it was an earlier one, the inspiration being the B1 Class and the X Class of the 1880s/90s. Though I suppose the early W4s would have been contemporaries. I'm rather a fan of grey too, which is entirely down to the SECR livery and inheriting a Bachmann N in that scheme. I've got a couple more SECR locos in the works with that livery, despite it fitting neither of my layout's two running periods (1912ish and 1947ish)! As for the lettering (all of it), we have @Corbs to thank for that - I'd send him an inspiration pic of something similar and a few days later some gorgeous photoshop work would be sent back to me. I won't pretend to understand the process, but I can certainly admire it! 5 Link to comment Share on other sites More sharing options...
TurboSnail Posted November 29, 2020 Author Share Posted November 29, 2020 Another project left languishing for far too long - I've finally got round to painting the wheels and getting it back on the chassis, which hopefully will motivate me to finish off the few remaining details. A Manning Wardle of an indeterminate class and age, probably a catalogue locomotive with a few customer-specified modifications, which was used as a contractors loco when joining up Guilford Colliery to the East Kent Railway. The Kent Coal Company subsequently bought the loco, naming it in tribute to Sir Edward Watkin, who had been an early enthusiast of the Kent Coalfield at their Shakespeare Colliery site. Its more powerful construction with larger wheels made it better suited to occasional trips on the light railway (when required) than the Company's other smaller shunters. I hope that's a good enough justification! 12 Link to comment Share on other sites More sharing options...
MattDitch Posted November 30, 2020 Share Posted November 30, 2020 Now that is awesome! Will you be releasing it? 1 Link to comment Share on other sites More sharing options...
TurboSnail Posted November 30, 2020 Author Share Posted November 30, 2020 10 hours ago, MattDitch said: Now that is awesome! Will you be releasing it? Potentially! I'll have a couple of conversations and see what we can figure out 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now