reggie Posted May 28, 2019 Share Posted May 28, 2019 Hi All, I have the Realtrack 156 DMU with the recommended Loksound Decoders. A note with the decoder says they should be programmed seperately or you will corrupt the files. Problem is my ECoS will not allow 2 Locos to have the same address (even default 3). So the question is how do you program them seperately but give them the same address so they will run together? I'm sure there is something obvious i am missing here! I have disabled Railcom, but it still won't allow them to have the same address. Any help would be appreciated! Thanks Reggie Link to comment Share on other sites More sharing options...
RMweb Gold Kaput Posted May 28, 2019 RMweb Gold Share Posted May 28, 2019 (edited) Program the decoder in one coach, remove it from the track, remove it from ECoS, program the second coach. Use that entry in ECoS to run the full unit. Note one coach will probably need CV29 adjusted to reverse its direction for the lights to be the right way round and such. Edited May 28, 2019 by Kaput Link to comment Share on other sites More sharing options...
reggie Posted May 28, 2019 Author Share Posted May 28, 2019 thanks for the advice kaput - i will try that! Link to comment Share on other sites More sharing options...
reggie Posted June 11, 2019 Author Share Posted June 11, 2019 Hi I still had a few problems trying to get the ECoS to accept 2 locos with the same number. In the end gave them 2 addresses and put them in a consist and works well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now