N gauge electrofrog point - powering the frog

[johna]

I have a n gauge electrofrog point but it doesn't have the thin wire for powering the frog to a microswitch. Is it possible to add the wire and where is the best place to solder it too.?

 

Thanks

Johna

[jpendle]

As standard Peco N Gauge E/F points don't have the dropper wire, the slips, crossings, and Unifrogs do.

 

I usually solder to the rail inside the V of the frog. You could also solder to the wires underneath the point but you have to allow clearance on the baseboard or the point won't lie flat.

 

Regards,

 

John P