LNERGE Posted January 5, 2023 Share Posted January 5, 2023 I’ve just dropped an MX600R into a loco and fiddled with the CV’s as I’ve done for all the others and it behaves somewhat differently to my expectations. I’ve done a reset and programmed it again. Same results. CV’s 3 and 4 set to 40. It works as expected from the controller. CV27 is set to 1. Any sniff of asymmetric signal and it stops dead. Remove the asymmetric signal and it accelerates at the rate set. It is a more recent purchase. Has anything changed? Looking through the list of CV’s nothing else has caught my attention that may need tweaking. Link to comment Share on other sites More sharing options...
Nigelcliffe Posted January 5, 2023 Share Posted January 5, 2023 CV's 49-55 are relevant, and in a recent sound decoder I had to use the higher precision CV's (51-55) to make ABC behave as I'd want it to. Link to comment Share on other sites More sharing options...
LNERGE Posted January 6, 2023 Author Share Posted January 6, 2023 I’ve had a fiddle with them and no change. Link to comment Share on other sites More sharing options...
LNERGE Posted January 6, 2023 Author Share Posted January 6, 2023 I had another go just now. CV50 set to 60 has got results. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now