TM2201A Posted April 29 Author Share Posted April 29 Fresh off the FDM printer proving, the Seddon 16/4 (Motor Panels Type 1) Cab has come out out well. Link to comment Share on other sites More sharing options...
TM2201A Posted April 29 Author Share Posted April 29 Seddon 16/4 Tractor alongside the rather ungainly Bison2 Chassis. 1 Link to comment Share on other sites More sharing options...
TM2201A Posted April 30 Author Share Posted April 30 Seddon take two; the panels below the windscreen seemed a little flat so they've been reworked to improve definition and curved to match that of the windscreen, much better. Link to comment Share on other sites More sharing options...
TM2201A Posted April 30 Author Share Posted April 30 Spring has finally sprung, at least with a relatively warm evening, time to fire up the swear box and the resin printer. Link to comment Share on other sites More sharing options...
TM2201A Posted May 1 Author Share Posted May 1 Well that print was a chore, anyway on cab off and fitted to the tipper. 2 Link to comment Share on other sites More sharing options...
TM2201A Posted May 4 Author Share Posted May 4 Proof of concept I think on the Leyland Ergo Cab 4 1 Link to comment Share on other sites More sharing options...
TM2201A Posted May 12 Author Share Posted May 12 The 31' tanker has been on the workbench. The chassis is running and bogies sorted. The tank body, fittings and securing parts consumed rather a lot of paint. Body and chassis temporarily together. Link to comment Share on other sites More sharing options...
TM2201A Posted May 13 Author Share Posted May 13 I decided to tweak the Bison Mk3 cab a little, the cab sat a little higher on the chassis/mudguards than the original Ergomatics (a legacy of having to make space for the ill starred Leyland 500 Engine). 1 Link to comment Share on other sites More sharing options...
TM2201A Posted May 14 Author Share Posted May 14 Buffalo Mk3 Tractor to complete the set of the later cab (leaving aside the extra short wheelbase Bear tipper for now). 1 Link to comment Share on other sites More sharing options...
TM2201A Posted May 15 Author Share Posted May 15 (edited) Whilst waiting on printer time the CAD work has continued on; a Leyland Buffalo tractor has followed on from the work on the Bison 3 Tractor and the Seddon 16/4 has gained a flatbed. A mate has sourced an image of a long wheelbase AEC Mammoth Major tipper and it's very tempting, so much chrome and AEC bling it's a beauty but the resulting vehicle would dominate a small layout so I'm having to avoid the temptation (let alone his suggestions that I recommence work on sorting out the CAD file for the East Lancs Atlantean). Edited May 15 by TM2201A Confused Bison with Buffalo 1 Link to comment Share on other sites More sharing options...
TM2201A Posted May 15 Author Share Posted May 15 The improved Bison MK3 cab and air intake assembly came off the printer. 1 Link to comment Share on other sites More sharing options...
TM2201A Posted May 16 Author Share Posted May 16 Tanker body and associated parts finished and ready to come off of the FDM printer. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now