RMweb Premium nick_bastable Posted December 14, 2012 RMweb Premium Share Posted December 14, 2012 (edited) Like most modellers i have numerous ( well far to many ) projects on the go mostly 1/2 finished for one reason or another. After a quick discussion with Steve aka PIxie this thread has been created to showcase whats on your 2mm workbench those small projects which do not require a full thread or blog entry, Which hopefully will help give you the impetus to finish that project Ultima D48 3d printed body with chassis wheels turned down just need to squeeze some more weight and squeeze a DCX76z chip in... Ford railcar Worsley etch, Mikroantriebe 4mm 1:144 motor gearbox.motor, this may be a step to ambitious with my limited skills So people whats on your work bench ? Edited December 23, 2019 by nick_bastable 8 1 Link to post Share on other sites More sharing options...
-missy- Posted December 14, 2012 Share Posted December 14, 2012 WOW Nick! You are not making it easy for yourself! There are some seriously small models there and I look forward to seeing more of them in the future. I will try to post some of my stuff soon... Missy Link to post Share on other sites More sharing options...
Branwell Posted December 14, 2012 Share Posted December 14, 2012 Most of my current projects are not very photogenic assemblies of brass in the very early stages of being put together, but I do have some reasonably well progressed scratchbuilds (actually the first scratchbuilding I've done in quite a while) that might be of interest to somebody somewhere, viz: a Furness Railway two plank wagon (plasticard body on a shortened Association underframe) - rivet detail and couplings yet to be added and the body and the underframe have yet to be joined in matrimony ... a Furness Railway four wheel coach - body only so far and finally for now, Coniston signalbox - still a kit of parts so may look a bit wonky and still got a lot of work to do before I'm happy with it. David V 10 Link to post Share on other sites More sharing options...
Steve Sykes Posted December 14, 2012 Share Posted December 14, 2012 Looking very nice, David. Can I ask how you've done the carriage body? I'm just resizing the Furness GBV drawing from the CRA website with a view to trying a model - after all, a loco and brake is a train! Link to post Share on other sites More sharing options...
Branwell Posted December 14, 2012 Share Posted December 14, 2012 (edited) Looking very nice, David. Can I ask how you've done the carriage body? I'm just resizing the Furness GBV drawing from the CRA website with a view to trying a model - after all, a loco and brake is a train! Thanks Steve, and good luck with the brake van - I'll be interested to see how you get on with it, particularly as I'm going to have to build one or two in the not too distant future. What are you going to be hauling yours with? The carriage is a 25' All Third (Furness Diagram Eight). Sides and ends are 1mm plasticard with microstrip for the detail, brass wire for the grab handles and N-Brass Loco door handles. Windows were done by drilling out the corners and then sawing and filing to shape. I've still got to decide how I'm going to do the underframe as the 13'6" wheelbase doesn't match anything available from the Association - at the moment I'm leaning towards using a 15' wheelbase underframe behind plasticard solebars, but I need to make one up and see how it looks - and then there's the roof. Very undecided about that. Maybe brass, possibly plasticard - watch this space! Next time round, I may well go down a different route and build the sides in layers as I'm not totally happy with the way the panels look, but I'm hoping I'll be able to do something about that when the time comes to apply the livery. Edited December 14, 2012 by Branwell Link to post Share on other sites More sharing options...
Steve Sykes Posted December 15, 2012 Share Posted December 15, 2012 Thanks Steve, and good luck with the brake van - I'll be interested to see how you get on with it, particularly as I'm going to have to build one or two in the not too distant future. What are you going to be hauling yours with? I've got the Mike Peascod drawing of one of the 1910 0-6-0Ts that was in BRM a surprisingly long time ago (2009 I think) and I was thinking of possibly having a stab at that. My interest in the Furness was revived by staying in a cottage just above the Coniston station site this September. However my modelling pace tends to the glacial and so progress will be slow! Link to post Share on other sites More sharing options...
Pixie Posted December 16, 2012 Share Posted December 16, 2012 Excellent thread idea and its already bringing some cracking models out the woodwork. Nick - how do you find the running of the MikroAntreibe gearmotor? I'm guessing its one of the 4V models? Pix Link to post Share on other sites More sharing options...
RMweb Premium nick_bastable Posted December 17, 2012 Author RMweb Premium Share Posted December 17, 2012 Nick - how do you find the running of the MikroAntreibe gearmotor? I'm guessing its one of the 4V models? Pix Indeed it is I have tried the motor in the chassis against a 3v button cell and it managed to run along the work bench, my present thinking is to use a 220 ohm/1w resistor but im concerned about the drag the pick ups will induce. Most of my current projects are not very photogenic assemblies of brass in the very early stages of being put together, but I do have some reasonably well progressed scratchbuilds (actually the first scratchbuilding I've done in quite a while) that might be of interest to somebody somewhere, viz: fantastic work there David makes me think I should take up knitting instead of 2mm Come on people cameras out and post your latest effort Link to post Share on other sites More sharing options...
RMweb Gold TomE Posted December 19, 2012 RMweb Gold Share Posted December 19, 2012 Almost finished my Up Starter for Ropley, just need to tidy up in a few places find some way of replicating the finial and glazing the spectacle plates! Tom. 19 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted December 19, 2012 RMweb Gold Share Posted December 19, 2012 Almost finished my Up Starter for Ropley, just need to tidy up in a few places find some way of replicating the finial and glazing the spectacle plates! Tom. That looks superb Tom, beutifully crisp and clean, Jerry 1 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted December 19, 2012 RMweb Gold Share Posted December 19, 2012 Not currently on the bench at the moment but due to make a comeback soon in my "get part finished projects finished before starting another one" new years resolution. I have the same resolution every year and it usualy results in a few things being finished before I'm tempted to start something new! The train is the eight coach mid-week 'Manchester Diner', better known after 1927 as the 'Pines Express'. I will post more details on my Bath thread when they make it back to the bench in the New Year. Jerry 14 Link to post Share on other sites More sharing options...
Branwell Posted December 19, 2012 Share Posted December 19, 2012 You got any spare knitting needles, Nick? Are those your own etches Jerry? 1 Link to post Share on other sites More sharing options...
RMweb Gold TomE Posted December 19, 2012 RMweb Gold Share Posted December 19, 2012 That looks superb Tom, beutifully crisp and clean, Jerry Thanks Jerry! It almost went in the bin last night after I managed to distort the ladder, but I think i've got it just about straight again! Anyway, a couple of hours spent this afternoon and it has spectacle plates! Cheers, Tom. 13 Link to post Share on other sites More sharing options...
backofanenvelope Posted December 19, 2012 Share Posted December 19, 2012 Very nice Tom, I have been tempted to buy some of these but have deliberately been holding off as don't want to fill the box with any more swag grabs T. Link to post Share on other sites More sharing options...
Pixie Posted December 19, 2012 Share Posted December 19, 2012 On my work bench? Clutter. Jerry's workspace really puts mine to shame! Pix 3 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted December 19, 2012 RMweb Gold Share Posted December 19, 2012 On my work bench? Clutter. Jerry's workspace really puts mine to shame! Pix Don't worry Pix, mines usually chaotic. It had its Sunday best on because it was having its picture taken Jerry Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted December 19, 2012 RMweb Gold Share Posted December 19, 2012 Are those your own etches Jerry? No, the eight wheel stock is a combination of shot down PC kits and some that Chris Higgs did a few years ago. The two twelve wheelers that make up the Dining section of the train are Bill Bedford sides. All will ride on 2mm Association bogies. Jerry Link to post Share on other sites More sharing options...
Ian Smith Posted December 20, 2012 Share Posted December 20, 2012 I have some more of the 3D printed wagons to complete. The ones that are closest to any sort of finishing are another GWR W1 Cattle Wagon, and A GWR AA16 Brake Van. Hopefully by the New Year both of these will be complete, the cattle wagon will be the easiest as all it needs is a pair of RCH W Irons (and wheels), some brake gear robbed from an old etch, buffers and of course a roof. The Brake has all of the handrails to fit and the foot boards too. The 3D print included 0.3mm holes for the handrail supports (which I have opened out a little to take some split pin "knobs"). Once these are complete I really must get on with the 57xx chassis that I bought at the AGM to fit under a saddle tank, and also part built on the bench is one of Richard Brummits delightful low siphons. Ian Link to post Share on other sites More sharing options...
Chris Higgs Posted December 20, 2012 Share Posted December 20, 2012 No, the eight wheel stock is a combination of shot down PC kits and some that Chris Higgs did a few years ago. The two twelve wheelers that make up the Dining section of the train are Bill Bedford sides. All will ride on 2mm Association bogies. Jerry The MR coaches I did originated from Alistair Wright (5522 Models). They are the same diagrams as done by Worsley Works. On my virtual workbench are two new kits of Lowmacs. My real workbench will trump anyone elses for clutter. Chris Link to post Share on other sites More sharing options...
Pixie Posted December 20, 2012 Share Posted December 20, 2012 On my virtual workbench are two new kits of Lowmacs. They sound interesting Chris - what diagrams are they? Pix Link to post Share on other sites More sharing options...
Chris Higgs Posted December 20, 2012 Share Posted December 20, 2012 They sound interesting Chris - what diagrams are they? Pix 2-240 and 2-241. The first was a BR specific diagram, although it is a lengthened version of an LMS design (P52A/B). The second is more interesting. It is a Swindondesign which traces its origin back to Loriot diagrams G1 and G2 from the 1890s. I am hoping the kit will build all the various permutations. I even found a photo on the Bartlett site of an original G2 still in service in 1984. Chris Link to post Share on other sites More sharing options...
Pixie Posted December 20, 2012 Share Posted December 20, 2012 Marvellous - I'll look forward to them! Cheers, Pix Link to post Share on other sites More sharing options...
RMweb Premium Nig H Posted December 20, 2012 RMweb Premium Share Posted December 20, 2012 I have had a Bill Bedford etch for a Jinty chassis for many years, and having just acquired a GF Jinty body, decided to have a go at building the chassis. The frames do not cater for any particular gear set up so I was on my own there. I decided that a straight 30:1 worm wheel on the centre axle was the most straight-forward arrangement, as can be seen in the photos. Arranging the spacers to take the motor was a real bodge job, but I got something sorted in the end. Simpson springing is used on the outer axles but I decided to experiment with larger than 1.6mm diameter axle holes, so they are a 'bit bigger'than for for the usual method. The chassis performed well in a trial run, pick up seeming to be very good, apart from a slight sideways waddle. The photos show the chassis after adding the brake gear. This was a fiddly operation, the pull rods being mainly half etched, so very flimsy. The holes for the brake hangers are too close to the wheel rim, so I had to enlarge them to about 0.7mm diameter and solder the 0.3mm n/s rod to the side of the hole away from the rims - just about cleared them. The motor used is a Nigel Lawton 8mm diameter 10V can, glued to a motor cradle I had spare. It will be interesting to me to see how the loco performs when complete. Under test with the body attached, performance seemed to improve, compared with the chassis on its own. Nigel H 5 Link to post Share on other sites More sharing options...
Crosland Posted December 20, 2012 Share Posted December 20, 2012 The day after the 2mm chassis workshop in Oxford. Ready to jump in at the deep end for my very first 2mm build: It's not quite so tidy now! Testing the chassis Tender chassis And body Unfortunately progress has been stalled for quite a while. I hope to get going again over the Christmaas break. Andrew 7 Link to post Share on other sites More sharing options...
-missy- Posted December 20, 2012 Share Posted December 20, 2012 Superb work Andrew. Plus its really nice to see the chassis workshop provided someone with the encouragement to build something too. Missy 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now