garethashenden Posted June 25, 2014 Share Posted June 25, 2014 Ok I'm stuck. I'm at the point in my 850 build (http://www.rmweb.co.uk/community/index.php?/blog/blog-1571/cat-689-850) where I need to hold the gearbox in place. On previous (flexichas) chassis I have put a bit of brass strip or angle soldered to both the frame and the gearbox. That worked quite well, but it won't work on this build because I need to maintain the vertical movement of the axle. How is this usually done? I had a bit of a search but couldn't find anything specific... Thanks! Link to post Share on other sites More sharing options...
Miss Prism Posted June 25, 2014 Share Posted June 25, 2014 The wire fits in, but is not secured to, snug holes in the rigid thing and the gearbox. Further info Link to post Share on other sites More sharing options...
garethashenden Posted June 25, 2014 Author Share Posted June 25, 2014 Thank you. I knew there had to be a simple solution, just didn't know what it was. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.