charliepetty Posted December 27, 2014 Share Posted December 27, 2014 Has anyone had or heard of compatibility issues with ESU & Zimo sound decoders & Dcc Concepts/Gaugemaster non sound decoders. IE programming CVs, operating light functions and general operation/direction of travel etc. As we all know Hornby's earlier attempts into DCC didn't get off to a good start! Charlie Link to comment Share on other sites More sharing options...
Baldy Posted December 27, 2014 Share Posted December 27, 2014 Charlie I am a dcc novice but am using an elink with dcc concepts (8 pin direct) and gaugemaster (assorted) non sound decoders, and your class 67 sound chip (which is superb). I also have one zimo sound decoder. You can't easily read/write to CVs above 255 but, other than that, am not aware of any problems and I also can't remember reading of any particular issues on the Hornby railmaster forum. Link to comment Share on other sites More sharing options...
John YouChoos Posted January 6, 2015 Share Posted January 6, 2015 I've had numerous customer reports of RailMaster doing odd things to CVs, but not managed to nail down the exact scenario yet. Link to comment Share on other sites More sharing options...
charliepetty Posted January 15, 2015 Author Share Posted January 15, 2015 Any one come across Hornby HSTs scrambling the CVs when you re-address them, I have had two with the lighting CVs scrambled, thus no lighting. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.