Atso Posted January 24, 2015 Share Posted January 24, 2015 Hi all, Following on from a very difficult 2014, I am please to announce that Atso-Cad Models has made two models available to order as 3D prints from Shapeways. These are - Ivatt GNR/LNER C12 body - LNER Dia. 120 Full Brake (Pigeon Van) The Shapeways shop can be found here: http://www.shapeways.com/designer/Atso For those waiting for the H Class, there is still some development work to be completed before this can be released. Once, I'm fully back in action the H class will be a priority. All the best. Link to post Share on other sites More sharing options...
Atso Posted January 28, 2015 Author Share Posted January 28, 2015 Hi all, I have been advised today by Shapeways that there was a problem with the Pigeon Van CAD file. This error has prevented Shapeways from being able to print this. For anyone who has received a credit, this issue has now been resolved and the Pigeon Van can be printed as normal. Sorry for any inconvenience caused. Steve Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 29, 2015 RMweb Gold Share Posted January 29, 2015 Good news. I would definitely like a couple of the vans. I can't really justify a C13 although a loco that I like greatly for its looks. What chassis is it sat on? Edit: Silly typo. C12 which is a rather better looking loco than C13. Link to post Share on other sites More sharing options...
Atso Posted January 29, 2015 Author Share Posted January 29, 2015 Good news. I would definitely like a couple of the vans. I can't really justify a C13 although a loco that I like greatly for its looks. What chassis is it sat on? Actually, it's a C12 but a C13 sounds interesting... The chassis is a Dapol 14xx with the outer rear frames removed and a Farish bogie (as fitted to the Jubilees, etc) pinned to the front. Hope this helps. Link to post Share on other sites More sharing options...
RMweb Gold Revolution Ben Posted February 3, 2015 RMweb Gold Share Posted February 3, 2015 Hi Steve Good to see you back in the saddle, as it were, after what sounds like a testing year! cheers Ben A. Link to post Share on other sites More sharing options...
JimF51 Posted February 8, 2015 Share Posted February 8, 2015 Steve, both look excellent! Don't fit my SE area, but I'm patient, and can wait for the H Jim F Link to post Share on other sites More sharing options...
gelboy45 Posted March 27, 2015 Share Posted March 27, 2015 Hi Steve Have just found you again after reading about your latest announcements in the latest NG Journal, my offer of a donor M7 chassis for your proposed H Class is still open! Regards Gerry Link to post Share on other sites More sharing options...
millerhillboy Posted April 20, 2015 Share Posted April 20, 2015 Do you have any pictures of a finished model of the pigeon van by any chance Link to post Share on other sites More sharing options...
Atso Posted May 2, 2015 Author Share Posted May 2, 2015 Do you have any pictures of a finished model of the pigeon van by any chance Sorry not to hand. Once I've found mine again (still not turned up during my unpacking) I'll post some. Failing that, I believe that MikeJ has posted pictures of his one somewhere on RMWeb. I'll try and find a link for you. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.