Jump to content
 
  • entries
    122
  • comments
    872
  • views
    104,249

Visualisation


MikeOxon

932 views

I've been spending some time thinking about scenery and how to make my simple scenes more appropriate for 19th-century England.

 

As I have described in earlier posts, my layout started life as a 'kiddie' layout, to interest my then small son. Many of the buildings are from very old kits and include several Faller buildings which, while very nicely detailed, have decidedly non-English appearance. For example, this is the workshop associated with the quarry on the narrow-gauge (009) section of my layout.

 

blogentry-19820-0-14051300-1427669265.jpg

I like the 'romantic charm' of many of these buildings, so have been thinking how I might 'Anglicise' them a little. One of the most obvious differences lies in the roofs, which are wooden shingles of a type almost unknown in Britain. So, my first step has been to consider some of the alternative sheets available from Wills kits. But which to choose?

 

I hit on the idea of using photography and some Photoshop trickery, to help me decide. In the process, I discovered that wonderful material called 'Tacky Wax', which does exactly what the name says. A very thin smear of this wax on the back of a panel of Wills roofing allowed me to attach it temporarily to the roof of the existing building. In this way, I could quickly compare slates (Wills SSMP203), dressed stone (SSMP202), and sheet+batten roofing (SSMP229). I photographed the building with each sample sheet 'tacked' in place, then used Photoshop Elements to select the roof area from each photo and paste it onto the original building. (I didn't even cut the sheets but trimmed the excess in Photoshop).

 

All the photos were taken under exactly the same lighting conditions. The results are shown below:

 

blogentry-19820-0-02149900-1427670099.jpg

 

For my chosen model location in the Oxfordshire Cotswolds, I have no doubt that the 'dressed stone' (Wills SSMP202) looks the most suitable and, with careful painting and a little applied 'moss', should give quite a 'realistic' appearance. I feel that this way of using photography has helped me to visualise how I want to go forward with my modelling.

 

I have had another important revelation recently. Having spent a career soldering electronic circuits, I couldn't understand why I was having so much trouble with soldering brass models. Then the penny dropped - 'lead-free solder' :( I've bought a large reel of 60:40 and things are back to normal! Now, my bit stays bright, wets easily, and makes joints in seconds. So long as babies do not chew my model engines, I should be ok.

 

Finally, an atmospheric painting of the quarry area from Amy's easel. I feel that she has captured something of the Gothic gloom in the dark recesses hollowed out from the limestone hills.

 

blogentry-19820-0-61017800-1427669230.jpg

 

Mike

  • Like 6

5 Comments


Recommended Comments

  • RMweb Gold

Mike I like the idea of trying different roofs out.

 

I am with you on Lead free solder. You are supposed to use the stuff on pipework for drinking water. I found it didn't flow right. You might find some 145 deg useful if you can get the lead based stuff. The lower temperature helps a lot.

 

Don

Link to comment

Thanks for commenting, Donw.  My biggest problem with the lead-free stuff was that the iron bit kept turning black and refusing to 'wet'.  I had to switch off every time I paused for a few minutes.  I do have some low-melt stuff as well, which I use for white metal kits

 

Mike

Link to comment
  • RMweb Gold

Long live tacky wax! Interesting to see these different styles of roofing compared to each other.  Dressed stone is not very familiar to me so I just read up on this. Thanks for the impetus.

 

Amy's talent is improving all the time. She must be very interested in locomotives to portray them so well !

Link to comment

Thank you, Mikkel.  Cotswold 'slate' is very characteristic of the area, although it is not slate at all but limestone!  you can read all about it at http://www.stoneroof.org.uk/Tewksbury%20stone%20slate%20roofing.pdf

 

There was concern several years ago when some Cotswold villages were stripped of their traditional roofs in order to refurbish Oxford colleges.  The roofs are a large part of the attraction in tourist villages, such as Bourton on the Water.

 

Amy seems to like visiting and painting industrial sites.  Sir John remembers the time when bands of navvies building the new railways used to roam the area and it was unsafe for any young ladies to go out alone.  Fortunately, those lawless days passed and England has become very civilised, through Victoria's wise reign.

Link to comment
  • RMweb Gold

Thankyou for that link Mike, so much there is to learn! I like the rustic yet elegant look of the stone. That "swept valley" detail looks lovely!

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...