Jump to content
Image restoration from pre-May 2021 continues and may take an indefinite period of time.

Les Johnson

  • Posts

  • Joined

  • Last visited

Everything posted by Les Johnson

  1. Yes, that’s the one. I am assuming that you actually have one and it’s not just a picture of something that you want? If it is just a pic can you tell me what make it is? many thanks again Les
  2. Love all your work Sheepman (I’ll have to start calling you Glen (Ford)! From the weathering, the buildings, to the landscaping , all brilliant, especially Sheep Dip, with all the slate buildings etc. Anyway enough of the flannel, joke! Can you give me the dimensions of the cream and brown timber station building. Length, depth and height to end gable will do. Many thanks in advance Les
  3. Nice gardening there Ken. Some great railway shots too. Hope you all had a great Xmas, however restricted. We were very naughty and basically did what we normally do with our children! I’m trying to add a photo so bear with me. This is my extension past St.Vigeans. Unfortunately since this was taken, we decided to move house and the extension bit was demolished. Then I had a TIA and plans changed, so I could have left it where it was! Anyway I’m OK now and we have decided to stay here a bit longer, so I’ll probably rebuild it. Treated myself to a Dapol 08 for Xmas. Very pleased with it. My reasoning, apart from rule 1 was that it’s on loan from Hurlford shed. Have to go now so all the best for New Year. Take care Les
  4. Les Johnson

    Dapol 08

    Thanks guys for your replies. Got my black one today, but hidden at my sons TIL I can smuggle it on board! Saw further back on rail-online my preferred no. 13008, which doesn’t have wipers, so saved a few bob there, but where can I get numbering sheet to match? Railtec? Does anyone think buffer housings are easy to remove? Anyone tried it? Les
  5. Les Johnson

    Dapol 08

    Sorry if someone has already asked/answered this but is there any great difference between early and more recent batches regarding build quality (ie. windscreen wipers and removal of brass bush on conn rods) and running quality (ie. is same motor and gearbox etc). If there is how can I be sure to get one from an updated batch? Are they serial numbered? many thanks in anticipation Les
  6. Simon, just looked back over90% of this to find brass ferns but can’t see what make. Are they Scalelink or what? Can you remember? many thanks Les
  7. Yes Paul, welcome back. That water tower is amazing, as I’m sure the rest of the layout will be. What you’ve done with that grubby bit of track is something else!! Les
  8. Thanks so much. Do you happen to have a 3M reference no for your scotchlocks Les
  9. Getting even better by the day! Meant to ask you the other day, what size cable do you use for droppers and bus bar, and how do you find the suitcase connectors with regard to conductivity and ease of use? regrds Les
  10. Absolutely awesome as everyone has already said, tenfold! The vision, the skill, the commitment, perseverance.........words fail me. Can’t wait to see more. Just a shame lockdown has prevented money recouping business, but at least you can get it to the next stage. Les
  11. Will you stop posting real pictures and pretending it’s all your own work! (ie.J36 with coal wagons) Les
  12. Ken, just a general question. Would the ballast in steam days have been darker, greyer, blacker on main running linesthan it is today, which seems a more brake dust colour? Les Hope you’re all well
  13. Just caught up! Almost prefer the platform ‘before’ you wiped off the weathering powders . Les
  14. Brilliant buildings and weathering Duncan. Sorry if I’ve missed this previously but what size strip did you use for the sash windows on the extension? Les
  15. Hi Aard, not an expert or anything, just interested in your Scottish project. I’m doing Arbroath shed and environs, but I’m not on here. Just a thought about your ballast. The crushed ‘stone’ Looks OK for the mainline, but if you haven’t already, have a look at Steve Fays Cardiff Canton, or his Smoke Ash and Steam for the shed areas. To me, they’re the definitive ways to do it. Keep up the good work cheers Les
  16. Can we see inside the box please.? thanks Les
  17. What can I say! Absolutely amazing! I haven’t even picked up my Stanley knife in anger yet! I’ve been trying(?) to extend my baseboards past the box and onwards towards the stone/brick bridge over Brothock water. Think I’ve finally cracked the actual structure, now I just need to lay the track, landscape it,etc, etc, etc. Is your box all plasticard and strip? Also meant to ask you earlier, is it only the outer two front windows that are ‘sash’? Still can’t believe you’ve finished it. So much for lockdown! cheers Les
  18. Hi Al, caught up with this just recently and I have to say it’s amazing, but if I can just throw in my three pennethworth on the hole in the wall (or the elephant in the room), why not just build up the field at the back and put in an overgrown occupation crossing and add a few sheep instead of a double decker bus. Whatever else you do the hole is still visible! cheers Les
  19. Ken, what are you doing to me now I’ve just nearly finished my signal box? I was going to say rule one applies cause I didn’t know if any pics existed apart from that long distance one you sent me previously, but now I can’t! Never mind. Just today received the printed sign from my brother in law. I’ll post it to you as soon as I can get to the postbox!! This new pic, can’t you take a screen shot with your iPad/iPhone? cheers again Les
  20. Hi Ken, that latest factory looks fantastic. Hope my warehouse turns out half as good. ive had my brother in law print up a St Vigeans signal box nameplate for me and asked him to do one for you in OO scale. If you can email me your address I’ll post it on. Les
  21. Thanks Ken. Where do you keep finding this space in your loft? You must have added about 3 extensions now? Ha,ha! That pic of mine was not taken in my lounge! Honest! Hope you don’t take this the wrong way but how accurate is your version of St.Vigeans box, ie. with regard to the window arrangement and flat front, as opposed to recessed brickwork? regards Les
  22. Ken,another question if I may? What height would the multi armed signal outside the Baltic warehouse be? The two longest ladders appear to be about 27 rungs. Would they be 9” or a foot apart? Do you or any of your ‘cronies’ know? Les (great new pics btw)
  23. Hi Ken, got the mojo back (wherever it’s been) and finally started Baltic warehouse in Dens Road(seeing as how you refused to build it for me in 7mm! Ha,ha) I’m hoping that the picture I took will transport, if that’s the right word? Still very early stages. There aren’t that many windows in the side but I was using this card as a template. I was planning to try to incorporate some interior detail, I had all bright ideas about loads of barrels and pallets and bits and bobs but I think I’ll just stick to getting the outside scribed and painted and mess about with scatter etc outside. That’ll probably take me the whole of my enforced ‘isolation’. Something to keep me occupied anyway and out of her hair! Talking of which, I hope you are all keeping well and safe up there in the north? regrds Les (ps. Looks like it’s worked???
  24. Giles, windows on page 5, where are they from please? Also have you changed your e.mail? I'm trying to order some stairs. Is your telephone no. still the same? many thanks Les
  • Create New...