Woody C

Whether it's new or old, there is always something wonderfully magical watching your empire operate Ian - especially the helix!. 

6 hours ago, ian said:

Anyway I think your eye test is overdue:

As you can imagine, someone like myself is well used to the threat of solicitors and my own solicitors, Judicious Jesters, will be ready and waiting to be un-collared and to get their teeth into the bone of any canine litigation matters that may arise although I do admit that perhaps I should have gone to a quality opticians rather than my usual branch of Blink Blasters!

4 hours ago, ian said:

guard dog

Has Blitz the less than successful police dog from earlier episodes now got a new home????

On 14/02/2024 at 19:54, ian said:

DAF Variomatic transmission

*Shudders* They used to sound as though they were going to blow up as they pulled away from a standing start. Not seen one in years until a few years ago when someone locally restored the Volvo version for reasons that even the owner could not explain!

Thank you Ian and hoping you and your family have a great day!

Hello Keith, Many thanks for your kind words and I am really pleased my ramblings were of use! I did surprise myself in looking back just how little the basic layout cost me in terms of an hourly rate. Using the £455 cost of baseboard, track and scenics and about 200 hours build time, it further breaks down to a weekly rate of about £4.50ish which is less then the cost of a single Mars Bar each day! I am beginning to sound like one of those life insurance adverts now but I think it does show that as a hobby railway modelling can be affordable and good value. Good value not just in terms of money but also the development of skills. I have certainly learnt a lot from Chalkdon. However the most fulfilling moment for me was as I was walking out of the Man Cave the other day I turned around just to make sure I had switched off the controller. I just stopped for a moment looking at the layout and it suddenly hit me that it was something that I had built and created from scratch and kits. That moment was probably priceless in terms of fulfillment if that makes sense.

As I said in the video, the most difficult part of the whole layout was getting started! After that everything else begins to flow naturally! I hope that your house move goes well but don't wait to long for that fresh start!

For anyone else reading this, my dulcet tones on the subject of both having just about finished (and I did not think I would be saying that for many years yet!) Chalkdon and the costs of it are available in this video

On 15/12/2023 at 12:06, ian said:

This year's Christmas blockbuster film

Well, I could not wait until Christmas day to watch this! Not disappointed either! Another great video Ian!

A thought did go through my mind (an unusual and at times dangerous occurrence according to Mrs. W!) as I watched which was how long does it take to clean all that track or is the Marklin technology such that it self cleans?

1 hour ago, ian said:

but I do have a sign!

 

Was it one you made earlier?

On 06/12/2023 at 21:23, ian said:

Mission accomplished!

A phrase I am unable to say in relation to most of my projects! I take my virtual hat off to you Ian. I recall the start of the project with the branch line and look somewhat disbelievingly at what you have constructed leading from it in a short time and the wonderful layout you have now. Most modellers construct an extension branch to their layout after having built the main layout but you have done the exact opposite! Time to enjoy the fruits of your labour and run those trains even more! Thanks for another year of entertaining, informative and amusing posts! Woody

2 hours ago, Chris Williamson said:

Congratulations!  I've been contemplating my gates for over three years!  Neither are they scratch built like yours!!  I offer, in my defence, the fact that I'm guilty of wanting to motorise their operation with a couple of DCC controlled servos already purchased for the purpose.  All I have to do is design and build the mechanism to mount the servos, link to the gates and allow the entire assembly to be fitted to a baseboard that hadn't taken into account this ridiculous inclination.  @Mike Buttell will now, quite rightly, point out the foolishness of my desires.  You, on the other hand should be applauded for having gates that Can be operated Without resort to such over engineering.  I really should know better by now.  Anyway, well done!

Hello Chris, Many thanks for not only your kind words but also explaining your own experience in words that brought not only a smile to my face but also an audible chuckle from me that Mrs. W picked up on! I then had the job of trying to explain what I was amused about and why, which was not that successful given that Mrs. W's main interest in railways is as a means of travel to get away from me! I must admit I did think about the possibility of motorising the gates but given my abilities thought the better if it as it would no doubt have ended up like a four handed clock with a major malfunction . It is a miracle that they even open and close with digit power let alone digital power! I do hope you get your gates mechanised and installed soon so I can learn how to do it. Woody.

Hello, A bit of an open and shut case with the latest addition to Chalkdon with some long awaited level crossing gates having been constructed and installed. Probably would fail any Rail Safety checks but the locals are happy! They doo need some further bedding in around the posts and a bit of weathering but I am quite pleased with how this project has turned out.

Maintenance loco No5 has benefitted on its trial run of being able to run through at speed which is useful given its Kato chassis!

For some reason that I cannot recall I decided I wanted the main gates to be able to open. Brass wire hinges and a miraculous case of actually measuring things rightish means they do that.

Given that the width of the road is just about twice that of the track bed means that the gates conveniently fold over each other. Almost as though I planned it!

Unfortunately for this Dapol pedestrian the side gates do not open so it is going to be a long wait!

The problem with these close up pictures is that they show just how much more there is to do!

On 30/11/2023 at 00:41, cp409067 said:

At 2.45 in the YouTube presentation it is stated that the KATO motor is 3 volts.

 

The packaging of a Kato 11-109 says -

 

"Maximum DC12v"

Hello Christopher,

Thanks for your comment regarding the Kato chassis. One of the things I discovered whilst trying to research the Kato chassis and the possibility of putting a DCC chip on it was that there is not that much information about the technical specifications of this or the other useful chassis that Kato produce. What I have come up with, as someone who is in no way an expert on electrical matters, is purely my observations and interpretation based upon what I found on the internet, which can at times also be at odds with itself!

Whilst the chassis itself is advertised on the packaging as being capable of taking a 'Maximum DC12v' my understanding is that the motor itself may not be built for12v. From what I further understand, the 109s predecessor, the 103, had a 3v motor which ran on DC12v due to circuitry that dropped the 12v to the 3v that the motor was designed for. I am not sure if that circuitry was external to the motor casing or contained within but I am led to believe it was also advertised as 'Maximum DC12v'. Given that the Kato 109 packaging also states  'Do not operate this loco on DCC #00 (analog address)', (which is what you could do with the Bachman EZ Command DCC controller which allows the operation of a DC loco on a DCC track using that DCC controller) it is reasonable to assume that the motor may not be as robust as a pure12v motor in a modern model locomotive might be expected to be. To my mind this is an indication that the itself motor may not be 12v. In adding a DCC chip I also found that the chassis ran at relatively higher speed than I could obtain using just DC control.  Unlike DC control, where the voltage picked up by the motor from the tracks varies from 0v to 12v depending upon the controllers setting, my understanding is that DCC delivers a constant 12v to the motor but the speed of the motor is controlled by the chip as it pulses the 12v.  In adjusting CVs 2,3,4,5 and 6 I managed to have a slower running more controllable chassis but still not as good as DC. Again my suspicion would be that the motor itself is not built as a 12v motor. 

Whilst none of the above is conclusive proof that the motor is either 3V or 12V my own interpretation is that the motor itself is likely to be 3V although as advertised the chassis will run on a maximum DC12v which is what most DC users want to know. Either way the important part to me is that I have managed to build this loco for £47 including a DCC chip and it works and has continued to work running for 2 hours on the layout yesterday without a glitch and I hope that may encourage others to have a go.

As I said at the beginning I am no expert but I trust you appreciate from the above why I said what I did in my video.

Regards,

Woody

. 

Hello, Been too long since I have updated this but my time since early 2023 has been spent on a number of other projects including some on Mrs. Woody's' To Do'  list! However Chalkdon has been running on occasions and just recently has seen the arrival of some new rolling stock including this.

It is a 3D print that I picked up from the Sleaford Model Makers Show for £9. It runs on a Kato 109 chassis which cost me £26. I have added a Lais DCC chip which cost a further £12 making a total cost of £47 and about 10 very enjoyable hours of my time! All in all a bit of a bargain! There are slight compromises such as the chassis having a DCC chip fitted means the 3 volt motor is probably not as slow as on DC but fiddling with some of the CVs has made it good enough for me! I know that you can fit resistors, diodes and other electrical wizardry to reduce voltages but to be honest that is going a step too far for my skills!  Fitting the chip was relatively easy - the hardest bit being getting the chassis apart.

If you have trouble getting to sleep there is a YouTube video on this project at 

Hope this is of interest and thank you for your continued interest in my glacial progress with Chalkdon!

Woody

That is one fine video Ian. I know from my own Crossroads style amatuer productions  that these things take a great deal of time to put together so thanks and nice one! Looking forward to the next installment.  At the risk of asking a stupid question was that a clock that you are working your timetable to ticking in the background ?

All I can say is watch out Mr. Waterman! Awesome layout Ian!

2 hours ago, ian said:

Unless it has been allowed to rus

So no garden extension then?

Do like that gold train. The ultimate gift for a Marklin collector so I am further assuming (which normally means I am wrong) that you have a number of these stashed away Ian? 

4 hours ago, ian said:

Followed by the final section of the main line

As I am in awe of both the quality and technological advanced nature of the Marklin brand I am presuming that they produce or have produced  a special golden section of track just for such occasions? Or am I just verging on the realms of fantasy? Either way, I do have to say some truly incredible work on your whole layout Ian - well worth a gold medal, if not track section, in the Olympics of railway modelling! 

Brilliant! All those electrical buzzing noises and similar just add that extra something .

And with all those transformers, relays and similar electrical items on the layout, I have this vision, as only Woody can,  of  some nearby power station struggling to cope with demand and bringing in an additional generator as you switch on and operate the layout Ian..

2 hours ago, ian said:

Why?

I understood up to that point! Sounds very complex Ian, but I am sure you will make it all work!

On 07/04/2023 at 09:02, F-UnitMad said:

Hopefully it's in the To Do list, but I would be looking for a boarded crossing for passengers to get on the platform, rather than just across the ballast?

Despite this job not appearing on Mrs. Woody's 'To do list', secret work has seen progress....

7 hours ago, ian said:

You are Laurence Llewelyn-Bowen and I claim my five pounds!

Whilst I am sure to be recognised as Laurence Llewelyn-Bowen would be a huge step up in my worldly standing, I have it on good authority from Mrs. W that this would be impossible as even LL-B would be shocked by my fashion choices, colour pallet, aptitude for making the best of clothes look somewhat agricultural in nature (as stated on one of my school reports) and ability to turn MDF into anything but a useful object! I am therefore afraid the £5 is still somewhat elusive and remains unclaimed!

For those who remember the program Changing Rooms, you may recall the ever popular Handy Andy who tried to turn his hand from manipulating MDF into the somewhat wild creations sought by the aforementioned Laurence to becoming a pop star, unfortunately, I believe, unsuccessfully. Take yourself back to a time before the internet but recaptured for you by the internet, with this unique Handy Andy cover version of If I had a hammer.....

50 minutes ago, ian said:

If the wife doesn't complain soon I may extend it around the living room...

And I thought that you had gone to town on the garage with coving!

Brilliant work on the layout Ian. Yours is one of those layouts which has so much in it that whatever your particular persuasions on model railways people are always going to be fascinated and indeed delighted in seeing it.

Now if 20m of coving will be enough for my garage and they do that nice Laura Ashley paper at the DIY store too.........

Hello and for those wishing to see the delights of my video making failures involving this layout and the latest updates on it as well as some probably not so sound chatter about the Bachmann EZ Command controller which I use, here it is 

Hello and continued thanks for your interest in my layout.

Some more progress on Chalkdon, as this layout is now known although it is still very much just for the fun of it! When I decided to call it Chalkdon, I then Googled the name to find out where potential letters of litigation might emerge from, from disgruntled residents upset at me devaluing their homes and area by association with my layout. Strangely enough my screen showed this 'Google Maps can't find chalkdon'. There appears to be no place called Chalkdon in the World let alone the UK! 

Anyway back to the progress! 

The station at Chalkdon has benefitted from some benches, name plates and lamps as well as the track being ballasted. The benches are the Peco ones with two glued back to back. Between them some square section plastic strip was added to support the name plates. These were printed out having used Word to produce them and then glued to some plastic sheet. The lamps are the Ration swan necked ones. The kit gives you various options to produce variations so I ended up with two double lamps and a single unit with parts left over to produce a few more. The small and delicate size of the parts plus failing eyesight made the construction a challenge but I think they came out OK. A few figures now inhabit the platform which are ones I painted from the Dapol Platform Passenger set. Much as there are some nice ready painted figures available I find it quite therapeutic painting these figures myself. My choice of colours for their clothes may be a full-on fashion failure but that probably reflects my personal wardrobe choices as Mrs. W would no doubt highlight!

The tree by the canal wharf is now glued in place as I think it just looks right there. With thanks to BernardTPM for highlighting an instance of trees overhanging tracks I feel fine about its location!

Whilst rummaging in a box I found this train. I bought the GVT loco about 30 years ago second hand for about £15 - those were the days! I believe it is a GEM whitemetal kit which was assembled by its builder using epoxy by the look of it and it is still in one piece. It runs on an old Grafar 0-6-0 chassis. I am lucky in that I run the layout with Bachmann EZ Command controller which does allow a DC loco to run on a DCC layout. You have to be careful as the DCC power makes the DC motor 'hum' and warm up so it is short runs only. I really need to convert it to DCC but that is a job for another day. In the meantime I am enjoying this, my first operational 009 loco that I had (their is a kit built chassis-less body that proceeded it and perhaps more of that another time).  The coaches date from about the same time but I did build these myself from Parkside Dundas kits. I never finished them as they still need glazing and the roof lights fitting. The couplings are Greenwich which I recall building happily with no visual magnification needed. That certainly would not be the case now.  

I like the photo below with the old rattily steam train and the modern comfy National bus side by side.

I have a few more kits for wagons and coaches in my 'to do pile' which should provide some variety. I just need the time to build them!

On another note I started making a tree about 5 years ago from twisted florists wire which was covered in acrylic paste and painted. I can recall visiting a superb model shop near Shrewsbury where my inquiring questions were always met with a very informative response resulting in me finding out about the delights of Woodland Scenics foliage mat. Having departed with a pack of that and several other items which Mrs. Woody was informed were very necessary and highly essential purchases I did start to foliage the tree but for some reason it never got finished. Move ahead several years and said tree was found in a box along with 5 Hornby Freightliners and whitemetal conversion kit which were part of aforementioned very necessary and highly essential purchases (they will get done Ian!) Seeing it there led me to think about placing it on Chalkdon near the canal wharf. Having also found the tub I put the foliage mat in as the mat seems to shed leaves even quicker then Mrs. W can place internet orders on QVCs bargain night, I have finished the tree. Don't ask me what species it is. I don't do trees! All I can say is it is not conifer!

Having temporarily put it in its  intended place I will leave it for a while before deciding if it is right. I know that on any real railway a tree overhanging the track would be a no no but this layout is just for the fun of it. Initial thoughts are I am growing to like it - ironically the real life tree would probably grow more quickly then my mind will make its mind up! Anyway here it is.