Jump to content
 

Loconuts

Members
  • Posts

    440
  • Joined

  • Last visited

Everything posted by Loconuts

  1. Loconuts

    MRJ 256

    No appology being offered Andy My name is John Coates currently appearing in the Great Western Echo and published several times in the MRJ. So I do not know what I am talking about Capt?
  2. Loconuts

    MRJ 256

    You want to check out who you are talking to first.
  3. Did you see the turntable in the NG&SGSL this issue?
  4. Loconuts

    MRJ 256

    No it is a working accessory and it involved modeling, almost bordering on the Model Engineering. However returning to the editorial I generally agree with most of it as a DCC user but they were Jerry's own opinions and a lot of layouts that appear in the MRJ use DC. DCC works for me and my layout, I don't think it will be superseded for a long while as it was developed for the American market and has been taken up in a big way over there. It suits their type of layout and the way they operate them. The point is that when the MRJ first published it was stated that the magazine was directed towards those modelers who want to build to a better and higher standard. As to your second point, if the 'cap fits etc'. Judging from your final remarks on your Kelly Bray Topic you seem to be a bit touchy these days and maybe a rest from the RMWeb might be good. Concentrate on your 16mm and no my comments were not meant as a joke. As a point of interest I have seen the MERG CBUS in use and was not impressed with it, a bit over the top.
  5. Loconuts

    MRJ 256

    I think you are on the wrong topic here, the 'Railway Modeler' site is elsewhere. I am afraid the MRJ is not for you 'Gadget Freaks' but for real modelers.
  6. And get caught out at the 11th hour, I am 2 MMI loco's short (C-16 and C-21) because PSC decided to pull the plug on that project. But a bit of lateral thinking I now have a C-16 to the same standard as the MMI C-19 using a Broadway Limited C-16 and PSC castings plus a bit of work carving. This project sounds it is a group project, if so is there no talent in the group to come up with ideas to progress the project forward. If the Alan Gibson kit you have is still in flat form scan it on your scanner and make paper patterns which can be stuck on sheets of brass and a few evenings work with a jewellers saw can result in in the sheet metal parts for 2 or 3 locos. If one of you know a friendly caster get the castings copied, word of warning do not sell on the surplus casting. Also look at combining the Slater's coach kits with the etched sides. There always ways round things as I found out when I went 7mm scale in 1975. Was there a kit for 'Lyn', I cannot think of one. Look at my first comment regarding things in the pipeline, manufacturers change their minds as their finances change so you could be waiting a long time. Also as most of these kits are produced by one man bands many things can go proprietors. John
  7. Oh pint night. What's it to be, having got through two failed projects? This L&B project has taken 2 years out of your life and what with the earlier paused American Narrow Gauge project, a life time littered with part built layouts. You have done some brilliant bench work for this layout and so it may be a bit large. My advice is to try some reworking of the plan to reduce the size. As to lack of stock well there is always scratch building, a common activity when modeling narrow gauge. Don't give up yet. John
  8. Loconuts

    MRJ 256

    Isn't 'Reading' some place in Berkshire?
  9. Don't forget you will have to add some extra roads for Loco servicing containing Coaling facilities, Sanding tower and Water tank. Also a ash pit with facilities to store cars on to take it away plus if your you are coaling from Gondolas they need tracks. That's two extra tracks. You have extra things like Lub store and Mess facilities. Also a road to store the Cabooses on. All the extra roads can be taken off the Turntable. Don't forget the inspection pits in the engine house. John
  10. Hi Chaz Don't beat yourself up over this. Peco do a narrow gauge wye point which is of a tighter radius than 21 inch and the Bachmann stuff runs through it OK. As long as the rails on the crossing 'V' line up everything it will be fine. If you are worried produce a skeleton point using PCB strip and lay some track up to it. A bit of test running will prove it then all you have to do is put some wood ties in the gaps. Also you seem to be worried about pushing trains through a trailing crossover, that's no problem it is pulling trains into a crossover that is the problem which this should not be. Curved points have curved crossing 'V's and providing care is taken they cause no problems. John
  11. Jeff I know what you mean about RTR, the interest does not last long. Although I have not built my Locos, all being RTR I have breathed on some being a BLI C-16 and a Bachmann Colorado and Southern mogul to bring them up to the same standard as the MMI offerings that I operate. However I tend to build my own stock using the San Juan kits and Labelle coach kits. I started with Bachmann but to my eye it just did not look right and I have gradually replaced it to the point the mogul is the only item left. Have you considered converting to electric traction? I saw a layout in the Model Railroader many years ago where the motive power was all early electric traction using boxcabs. If I remember right it served a mine complex at the top of a grade. Easy to build and you can still use your Bachmann stock to start with and gradually upgrade. You did say you fell into the 8 x 4 trap which is common in the States as is the 6 x 4 size over here. I would recommend the TOMA form of construction around the room, much more portable than the 8 x 4 which is like shifting a mattress. John
  12. I am sorry to hear that Jeff, Leesburg is a well modeled layout, was not so sure about why you went wandering off into the wilds of Wales and start modeling the GVT on the second half of the layout. You were at the stage to start having fun modifying the Bachmann Locos and stock. If certain things are not right with the Depot they can be modified. By all means do the GVT but as a separate layout and turn the back half of Leesburg into storage loops for the time being and then develop it. John
  13. Don't get too close Chris, this American Narrow Gauge can be very contagious. I know as I was pretty sane once happily modeling Swindon products and I got bitten. Chaz, great idea on the fake track spikes will pass that idea onto my mate in Canada as he only spikes every fourth tie. John
  14. Loconuts

    MRJ 256

    If he spent as much time writing articles for the MRJ as does on this site we would have a couple per issue
  15. Hi Chaz You might be interested that the 'Mara Harbour' site is still up and running, the photos are still there. If you remember he did a heavy weathered Bachmann Tank Car with faded lettering, worth reading back over. Covers painting the car trucks as well. John
  16. Hi Chaz Try this site, Tichy Train Group.https://www.tichytraingroup.com/Shop/tabid/91/c/hopper-open3/PageIndex/1/Default.aspx You might be able to cobble something out of the 'O' scale Hopper Transfers, a bit pricy though. John
  17. Expense time Chaz, the yanks splashed a lot of lettering over their freight cars, not just numbers. You are going to have to design your own, one of the problems of going freelance. A lot of this lettering was required by the Federal Agencies, suggest you look at photos of cars. Also the lettering carries on round the corner to the ends with various operating instructions, RR insignia and numbers. My side tippers are covered in such legends but they would not be any good for Hoppers. You need to find a company that produces the decals for the EBT cars, the only one I can suggest is San Juan Decals. Drop Paul Martin a line and see if it is listed in the SJD list. You can use all the EBT lettering but just replace the references to the EBT with FVR. John
  18. The interesting thing shown in one of the photos is that it is not a knuckle coupling between the loco and the varnish. It looks like a link and pin coupling as it is on the tender. The locos do not seem to have knuckle couplings. I have been doing some checks on my stock and can tell you if the stock have the uncoupling tails on then the coupling gets fouled on the pilot. The only way to over come this is to remove the uncoupling tails. Now my couplers are at 0n3 height and are the larger narrow gauge couplings, the Bachmann HO couplings are a lot smaller and are mounted a lot lower down so the situation would be worse. The way round it is to remove the uncoupling tails and go for manual operation, cut away the pilot in the area of the coupling pocket to allow the couplings to operate or extend the coupling forward using a piece of square brass tube so the tail clears the pilot. John
  19. Yes you are right about the AMS C-16 front coupling not fully functioning, it is the same as the BLI C-16. It is due to the pilots extending forward and not allow the couplings to work with the uncoupling metal loop beneath it. The Bachmann one has a pilot beam for switching so therefore a working coupling. I have looked through my photos of D&RGW trains and I cannot find any of them running tender first and the only time a front coupling is used if two locos are double heading or there is a helper within the train or at the end. Switchers use the front and rear couplings. John
  20. Hi Chaz Found the site, http://www.rrpicturearchives.net/rslist.aspx?id=EBT John
  21. Hi Chaz That hopper is a masterpiece, just a bit of prototype information on it though. The Bachmann Hopper is based on a EBT two bay stone hopper for a ballast work train and I believe there were four of them built and a side chute version. They were painted in grey with just the vehicle number on unlike the standard three bay coal hoppers which were in black and had the company Logo on. All these hoppers survive today and are in storage on the EBT also Kevin Trim of Dorset Models used to make a kit of it (unavailable now) in quarter scale and has a finished one on his stand. It is a lot bigger than the Bachmann version which is 5.5mm scale. The three bay hoppers were SG and used to go through a wheel lift to change the trucks to three foot narrow gauge. A little while ago I found some photos of the two bay hoppers, drop door and side chute versions plus a drawing of the three bay versions. If I can find them again I will give you the site they are on. John
  22. Flickr is not a safe place to store your photos as my son found out to his cost. A travel company pirated a couple of his photos that were stored on Flickr for their advertising blurb without permission. Not a secure place. He like me uses external hard drives for storage purposes, his stored at my houses and vice versus for fire security.
  23. Why did you buy these items at full RRP when you knew you could buy it cheaper else where, you knew the price at the time as it was marked on the package.
  24. I agree with the sentiment viewed in this post, but is it not the same with all the 'newbie' manufacturers. Errors abound with their new models because the people designing these models are inexperienced and lack knowledge of the chosen prototypes. They source information from the wrong sources, not very diligent with the information they have. As an ex-designer in manufacturing the time to check things out is at the CAD stage basically as it does not cost much things right, not to do it at the EP stage when everyone is screaming it is wrong. One small supplier I know of got caught out by this, supplying photos of the first EP model which was wrong from top to bottom and did not represent the prototype. They had to go back to China and have it retooled at great cost. The second EP,s have now arrived and it still has errors, why as they had the correct information from the start of the project. The answer is they did not double check the CADS against the information they had, something engineers are trained to do. In my final years of working for a living I came across the CAD Technician, these guys were wizards with CAD packages but were not Engineers, in other words they could draw you pretty pictures but could not engineer them so the item would work. They were also cheap to employ, are these the guys producing the CADS for these small manufacturers? These small manufacturers should use experienced consultants who know their subject, Dapol are using Richard Webster which has resulted in a vast improvement of their newer models. There are plenty of guys around who have retired and are experts in the hobby who would no doubt like to earn a little bit of pin money advising. OK it will cost a little bit extra on the cost of the model but is much cheaper than the cost of retooling, even at Chinese rates.
  25. A friend of mine used grey primer on a LMS loco followed by Crimson Lake, result a nice fetching shade of pink. Rule of thumb is red oxide under warm colours and grey under cold colours and always do a sample before hand.
×
×
  • Create New...