Jump to content
 

Geoff Cook

Members
 View Profile  See their activity

  • Posts

    1,791

  • Joined

 Content Type 

Everything posted by Geoff Cook

  1. Geoff Cook
    Empty another bottle and it'll comes with numbers
  2. Geoff Cook
    The turnouts could go further left and be arranged as a tandem would probably keep the sidings the same lenght just a thought
  3. Geoff Cook
    Mark Just found this topic with regards the amount of solder required, put on the joint solder the size of a pin head it goes a long way Geoff
  4. Geoff Cook
    WHY remove the spacers, your just making the job that much harder do it on bends if necassery the ballast should cover them, see BCB Geoff
  5. Geoff Cook
    0.4mm nickel silver wire from Eileens needle 21 gauge 40 mm length colour green Box 100 £2.70 Terumo Agani Sterile Needle 21G | Sterile Needles | MediSupplies
  6. Geoff Cook
    Yes, and they still work, although they are all fitted with servo's Geoff
  7. Geoff Cook
    Just wondering when your going back to point construction and wondering why you have fitted the tortoise plates being the operating wires from the blades are not fitted yet, so you wont know exactly were they will be. I used a surgical needles for the piece of tube 21 gauge and 0.4mm wire Geoff
  8. Geoff Cook
    cleavage night
  9. Geoff Cook
    Sliding arrangement to allow the vehicle to go around corners, the slide keeps the centre wheels to gauge A six wheel rigid would derail on the slightest bend another way is to remove the wheel rims on the centre axle only geoff
  10. Geoff Cook
    The first picture above shows the crossing, on the right hand end of the wing rail the fitted chair by the joint is shown with the key nearest the joint ,it should be facing away from the joint so the fishplate can fit in between the two chairs that make the joint between the wingrail and closure rail On the real railway you wouldn't be able to fit the key in the position you have it in. geoff
  11. Geoff Cook
    that's because I said x8 when its location is x1
  12. Geoff Cook
    Oops chair on x8
  13. Geoff Cook
    Damian Have you had a look at your signature, for the picture if its their you should be able to delete it
  14. Geoff Cook
    Are you sure about that
  15. Geoff Cook
    tell me about it, NHC boards mite need a balance weight.
  16. Geoff Cook
    Stu that's what it was originally like, if you look at the end of the boards in the last photo you can see that they would interlock which is ok if their are two of you loading the boards, they need to be placed exactly in the right position, if not in the right position their is the possibility of damaging the lower board The beams have the advantage that you can place the board on the beam and slide it into position which can be done by one person Geoff
  17. Geoff Cook
    You mean when the back seat of your car was covered in empty wimpy cartons
  18. Geoff Cook
    Just drill two holes, one by each stock rail rather than cutting slots
  19. Geoff Cook
    Their is a limit of 300 messages across all the folders, when in messages click the inbox arrow and it will show you what you have got in each folder you have
  20. Geoff Cook
    Do they engrave the glasses like they do for best layout, Iv'e only got one
  21. Geoff Cook
    More sensible in the current climate
  22. Geoff Cook
    If it keeps him quite, that's good isn't it Geoff
  23. Geoff Cook
    Or Teddy Grays sweet factory Geoff
  24. Geoff Cook
    BCB has moved on to a new home
  25. Geoff Cook
    You could get a decorator in to do it for you, although that will cost, ive just had a quote to do two bedrooms one painted the other papered just a small amount of £1900 required Geoff
×
×
  • Create New...