blanman27

Hi all I have been looking in vain for books, websites etc that cater for advanced DCC topics. I recently modified all my Bachmann class 37's so the rear lights and cab lights are independently controlled, following an excellent article in BRM mag (I think) which gave a step by step guide. I have since been trying to find out how do do this in other loco's but the information just does not seem to be out there. It would help if detailed wiring diagrams were available for each loco's PCB but they don't seem to be. If anyone can point me to where to find DCC info above the basic level I would greatly appreciate it.. Paul B

Hi I have just purchased an MXULFA and am having the same problem. I have successfully loaded a sound file so communication with the decoder obviously works, yet I get a 'Decoder not found' with the decoder update. Given that this post was from 2017 and I am having the same problem, I would have though somebody out there would have an answer by now? Any help appreciated. I will post an answer if I find one.. Paul

I have the plastic height gauge and the special pliers for bending the trip pin. Essential tools for Kadee. The glue method as suggested by Phil above is as he says 'crude but effective' for solving the NEM height problem. Cheers for all your replies to this thread, some valuable info gleaned from it. Paul

The answer to a problem is usually very simple. Perfect! Cheers Phil.

Thanks for all your comments. Much to consider I think cheers all

Hi all I have been trying to fit all my stock with Kadee couplings as I think they look better and they also are great for uncoupling with the magnet system they use. The problem is the differences in height with RTR stock, even with items from the same manufacturer. For instance A Bachmann class 47 and Bachmann MK1 coaches. The NEM pocket on the coach is set higher than the locomotive which results in the coaches becoming uncoupled frequently. It would be good if Kadee supplied a step up/down coupling like tension lock couplings do. Its about time the industry sorted this out and standardised the height of the NEM pocket. If anyone has any suggestions how to fix this problem I would greatly appreciate them. Frustrated!! Cheers, Paul

Hi all Just thought I'd post what I feel is an improvement to this setup in both terms of the fitting and the sound. I have the exact same configuration of decoder and speaker as this but while I am happy with the sound files by Bif I was not happy with the speaker sound, I think it's rather harsh compared to other loco's I have fitted with Zimo speakers. So I decided to take the Zimo speaker from my Bachmann class 55 and try it in the class 68. The result is not only a much improved sound (deeper and more rounded) but it fits without having to relocate the PCB! I am now super impressed by Bif's sound as I can hear much more detail than before. As a retired musician (ok I mean drummer ) I am all too aware of how important speakers are when it comes to getting the best sound. I have another class 68 on pre-order which I had ordered pre-loaded with sound. I am now going to change my order and fit the sound myself along this this speaker. Hope this is useful to you all. Paul

Ok I have determined the chip is ok. I tried it in a fourth loco, my Bachmann Deltic and everything worked as it should. As the Digitrains engineer suggested it seems to be the wiring in the class 37's and the class 57 which is the problem. I hope this post will be of help to anyone in the future who has similar problems, Cheers for your comments guys

Hi Izzy Thing is the functions are all pre-programmed by Paul Chetter at Digitrains and the chip comes with a full list of functions, cv's etc. The PCB in the locomotive simply provides an interface between the decoder and the locomotive motor, lights and speaker. The fact that the decoder also misbehaves in two other loco's does seem to point to the decoder but the original decoder is misbehaving also now which just further confuses me. I have other loco's with the same decoder that behave perfectly, including another class 37 so I just don't know what's happening at this point in time. Cheers Paul

Hi John Yes I always set 29 to either 34 or 38. Paul

Ok so now I have no cab lights with any decoder where all was working fine before I fitted the Zimo!? Time to call Bachmann and Digitrains Tuesday I guess?

Hi. Yes I have tried reset using both 8 and 0. A further problem happened when my system tripped out completely with this loco just sitting on the track. I got some warning buzzes then everything went off causing me to panic a bit as I thought my system had blown up! As it turned out everything was fine after powering off and leaving it a couple of minutes thankfully. Also, since i fitted this decoder, the cab lights now do not work at all with my original decoder in where as everything was fine before. Next step will be resetting the original decoder to try and resolve this. I'll post the results soon... Baffled!

I have just purchased a Zimo MX644D sound decoder from Digitrains and have a problem with the lighting. The locomotive is a Bachmann class 37/7 37706. When set to the forward position I get headlights and tail lights as normal but cab lights blink on every second or so rather than coming on properly. When I put it into reverse I get headlights AND tail lights on both ends of the locomotive and the cab lights come on. I can't switch the cab lights on using F8, as is normal, in either direction. I have spoken to the engineer at Digitrains who said this is an issue with the locomotive wiring and I need to contact Bachmann for a solution. However with my original decoder fitted (Bachmann 36-557) all the lighting functions correctly. So I tried fitting the decoder to another class 37 and the head and tail lights work correctly but the cab lights only come on when the engine is started, again no F8. Same results when fitted to a class 57. I do not dispute what the engineer at Digitrains has told me but I am wondering if anyone has come across this problem before and knows how to resolve it? As it is bank holiday weekend I can't speak to Bachmann until Tuesday so any help meantime would be greatly appreciated. Cheers Paul

I should look at who is replying... sorry beejack...

Thanks Richard that's the one. Can I just ask what glue you used? Some say just regular superglue and some recommend Rocket glue (of which there are various types). I will try a little experiment with superglue anyway but am interested to know... Cheers again Paul