-
Posts
2,641 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by LMS2968
-
According to an F.J. Roche drawing, 7'3"+8'3"+5'9".That's all I have.
-
-
Prototype for everything corner.
LMS2968 replied to jonny777's topic in UK Prototype Discussions (not questions!)
Ah, that'll be down to excessive weathering! -
Prototype for everything corner.
LMS2968 replied to jonny777's topic in UK Prototype Discussions (not questions!)
Flooding ahead expected? -
220 years since the first loco hauled train.
LMS2968 replied to Kris's topic in UK Prototype Discussions (not questions!)
Any photos? -
Dave F's photos - ongoing - more added each day
LMS2968 replied to DaveF's topic in UK Prototype Discussions (not questions!)
Welcome back, Mate! We've missed you! -
Prototype for everything corner.
LMS2968 replied to jonny777's topic in UK Prototype Discussions (not questions!)
When working opens, there was a difference between loaded and empty. The empties were obviously lighter so acceleration and braking were more rapid. But once you got them moving the empties were slower. As another guard put, 'The wind gets into the wagons and slows them down.' In practice, empties have two front faces moving through the air while loaded have only one. And yes, you could feel the difference. -
Prototype for everything corner.
LMS2968 replied to jonny777's topic in UK Prototype Discussions (not questions!)
Hence Gastarbeiter - foreign workers. -
5MT 73082 Camelot 107mph Andover run help
LMS2968 replied to Hillside Junction's topic in UK Prototype Questions
You certainly wouldn't want to be doing 107 mph on a Standard Five anywhere. They were hardly the best riding of engines, even when compared with the Stanier version, which could be lively, to say the least. -
Are you suggesting they sell figures with a scale 80 feet arm?
-
55 Foot Turntable - Allowed Locomotives
LMS2968 replied to WillCav's topic in UK Prototype Questions
They were not unknown but unusual and far from ideal. -
55 Foot Turntable - Allowed Locomotives
LMS2968 replied to WillCav's topic in UK Prototype Questions
You also need to be aware that the there will be parts of the arc of the wheel, including the flanges, outside the wheelbase itself and these must also clear the rails leading up to the table. -
So unless I'm missing something, the only direction available is back the way the train came?
-
No, they drove from the right. Many pre-grouping companies drove from the right but the LMS, LNER and SR standardised on the left. The GWR, as ever, went its own way.
-
That by definition would have to be a distant signal, otherwise it's a stop block, and the tern is Fixed Distant. There are some in preservation; there are or possibly were one or two on the Severn Valley Railway
-
As I said, I was a bit puzzled but the one I recall was a circular dummy, unusual in being yellow. I wish I could remember where it was and its purpose.
-
I don't think these dummies were exclusively WR. I'm sure I have seen one of these and remember being a bit puzzled by it. It might have been on the old Liverpool & Manchester line but after fifty years, who knows?
-
Level crossing stupidity...
LMS2968 replied to Katier's topic in UK Prototype Discussions (not questions!)
They should leave stones lying around for them to throw . . . -
The usual way was to put some on the far side of the stop block!
-
Prototype for everything corner.
LMS2968 replied to jonny777's topic in UK Prototype Discussions (not questions!)
Lime Street tunnel being opened out to series of cuttings linked by four-track tunnels. https://janfordsworld.blogspot.com/2015_03_19_archive.html The photos seem to have disappeared! https://janfordsworld.blogspot.com/2015/03/edge-hill-cutting.html -
Yellow stripe restrictions under the wires
LMS2968 replied to Legend's topic in UK Prototype Questions
I think we've been through the 8F and yellow stripe situation before, but the three ex-Middle East engines, 8773/74/75, were fitted with bigger top feeds containing shut-off valves to deal with the atrocious water in the desert. The valves were operated by a vertical spindle, one each side, and these spindles were above the loading gauge limit; no other 8Fs were involved. When the stripe appeared, 8773 was given it; 8775 had had its spindles cut off so was exempt, while 8774 still had the spindles but didn't get the stripe. In 1966, 8773 had a Heavy Intermediate overhaul at Crewe and was given a new boiler, the opportunity was taken at the same time to fit a standard top feed so she became within the loading gauge. Despite this, the stripe was reapplied and carried until withdrawal in August 1968. -
Dave F's photos - ongoing - more added each day
LMS2968 replied to DaveF's topic in UK Prototype Discussions (not questions!)
J2102 - When the real thing, etc.? Even a bus on the bridge! -
I can only assume that you did things differently in South Wales to us Northerners! If the WWT called for four wagons as the fitted head, that's what was bagged up, whatever was behind them. Getting carried away and piping up a whole lot of extras was likely to incur the wrath of the shunters when you arrived at your destination. It wasn't just a matter of their having to go between to unhook but they'd also have to pull the strings to allow any further shunting or remarshalling. They objected to being kept away from the teapot for so long.
-
I still have my notes from when I did my guards training way back in 1973, and even that late we covered livestock working as below. Note it states,". . . usually marshalled next to the loco."
- 25 replies
-
- 10