Duncan John

I’ve had a notification from Hattons that the 121 won’t be available until October-November anyone have any information on this. Duncan

Hi has anyone fitted DCC sound to any of the Ace loco range and does anyone have a guide to fit dcc to one of their Britannia’s. Thanks Duncan

On 09/05/2020 at 13:03, Adrian Stevenson said:

Hi Peter, they look very nice indeed.

 

Take the spring off the pony truck. My A3 has the same problem but only on points in reverse. This cured it.

 

Cheers, Ade.

Hi is it easy to take this spring off 

I had given it a three number address but then reverted to two which worked. Thanks for the tip I’ll remember that for next time.

Hi everyone 

I just wanted to thank you all for your suggestions/solutions to my problem, I finally have a fully working loco with all the appropriate sound and functions.

Firstly I deleted the loco from the Z21, I then placed it onto the programme track and reset it via the reset to factory settings CV8 having first adding it back on to the Z21, I used a different address and happy days it worked.

Thanks again for everyone’s advice and tips.

Regards Duncan

Ok I have put the loco back on the programme track it reads the address but will not move Z21 and iPad used I tries the loco with my Samsung phone again it reads ok on programme track but won’t move.

I tried my pannier tank no problem moves fine with iPad and z21.

it can’t be the chip as it runs fine using a gaugemaster do loksound v5 chips work with Z21 I have an A4 that has loksound 4 chip works perfectly these are both the L plug and play.

I also have an issue today I put a loksound chip into my o gauge A3 I could use my Z21 on the programme track addressed the loco but when I then tried it on the main nothing at all then tried it with a gaugemaster controller no issue at all worked first time. I was trying the Z21 with my iPad.

On 18/07/2020 at 14:19, Mustermark said:

 

Hi how good is the sound and did you have to drill out anything. Thanks Duncan