rafregt1

yes I have a mix of both peco points and seep motors I will check   the seep points and see if that is the problem thanks

My layout has been working well for a while, but now  part of the layout keeps tripping out on the main line over the top of the freightliner depot. as soon as I connect the main line it trips out I have not changed anything I have cleaned the whole layout but has not solved the problem. as you can see by the photos  were it says main line that is were the problem starts the station area is ok  also the freightliner depot. just the main line that the 60 is on can anyone help me to solve this many thanks

Just to say many thanks for all the answers to my problem, But I managed to find the problem  a bad mistake made by me  it was the two wires to my busbar  which when attached to the track  were round the wrong so problem solved.

thanks I will try this

Thanks for reply, I have not coloured coded the wires , all i have done is put the wires into the  seep motor as per the  letters on  it D and E  for the polarity of the point motor I have changed the wires around  but still  a fault,

I have looked into this before, but i am still having a problem, i have now changed my points and put in a seep P1 motor to the two points see enclosed photos, i attached the points to the layout with ins, fishplates as per the photo,  but as soon as i  put a loco over the track it tripped out. The two points are wired into the bus bar , and when you put a loco onto them without being attached to the layout no problem .  I have even changed  the two wires  around D and E  on the seep motor but no difference .any info will be of great help, many thanks.

many thanks for reply will try this and see what   happens.

I have checked  all my peco points which have been made up with a PL13 switch   which has been soldered as per the diagram on the  back of the peco  package as my layout is  quite large I have checked each point to see the the power is alright . i am finding it very hard to try and find the problem has anyone got an answer  that would help me to solve the problem. many thanks for any help TOM.

many thanks for answer  i will do this 

I am using PL13  switches on my points 

I have a problem with my power on the layout,  which is DCC, can someone be able to advise me. . If you look at the first photo this is my diagram of my layout. all of the layout works ok but for were i put the arrows when a loco come to them it trips the power, all my points are  DCC , so have full power I have tried to work out were i am going wrong. but i am stuck. can any one  advise me  how to solve the problem, many thanks for any help TOM.

when I put my 00 gauge class 37 on the line the lights work and also it powers. but I get no sound from it, I have reprogramed it as well but still no sound can someone tell me what I can do to fix this. many thanks.

Have you checked the circuit with a multimeter?

no I will try that and see what happenes

Is the siding wired to the same polarity as the rest of the layout?

yes I have done the points as the v isolated and the outer live.  I have done the points  so as to operate on ddc

can someone give me some advice as I am having a small problem with the track on the small shed siding., when I join the track to the main line it trips out, so I put two  iso  joints in the middle. and it worked alright, but as soon as I sent a loco  over the iso part the loco made it trip out. on my points I have  made the v of the point  isolated and the two outer live on all the points.  in the diagrams  enclosed. . I must be doing something wrong with the way the points are made  up on the branch, my layout is ddc .