giz
Members-
Posts
811 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by giz
-
Regional Railways DMU workings & formations
giz replied to BrakeCoach's topic in UK Prototype Questions
I seem to remember that one mod was to the multi working connection so that they wouldn't match the 158s to stop Regional Railways borrowing them. -
Regional Railways DMU workings & formations
giz replied to BrakeCoach's topic in UK Prototype Questions
Additionally, some 2nd generation sets were reformed as 3 car sets. In Scotland some 156 sets were split and added to a 2 set, in order I believe, that a 6 car formation could break into two equal portions en route. For much a longer period, in the West Midlands in particular, 150/2 cars were placed inside 150/1 sets. One other reformation that occurred was the 'leaf fall' sets made from one 156 and one 158 car as the 156 had tread brakes which cleaned the wheels whereas the disc brakes on the 158 didn't. -
Mark 2b, By Accurascale and IRM!
giz replied to Accurascale Fran's topic in Accurascale / Irish Railway Models
Just been doing a comparison, Bachmann Mk 2a and Accurascale Mk2b are near enough the same height as makes no difference. A Bachmann Mk1 on B1 bogies is noticeably higher, whilst a Hornby Mk1 is lower but not quite as low as both Mk2s. -
Mark 2b, By Accurascale and IRM!
giz replied to Accurascale Fran's topic in Accurascale / Irish Railway Models
That's what I was thinking but the Bachmann coach in the photo is the ModelRail TransPennine release, not the Regional Railways one. It looks like they used the same blue for both. -
Mark 2b, By Accurascale and IRM!
giz replied to Accurascale Fran's topic in Accurascale / Irish Railway Models
Received my TransPennine livery 2Bs this morning, thought I would compare them to other TP coaches I have colour wise. This first one shows the Model Rail Bachmann version. Dark blue is quite different: However, compared to a Lima coach I repainted with Railmatch paint and converted to a 2C there is a good match: The intention was to run my Lima and Hornby repaints in one train and the Bachmann and Accurascale in another but it looks like the Bachmann coaches could do with the dark blue repainting. -
Spišské Podhradie is a small town in north east Slovakia, about 40km east of Poprad. Its main claim to fame is Spišský Hrad (Spiš Castle), a World Heritage Site, on the hill above the town. At the bottom of the hill, below the castle, lies the terminus of a short branchline which joins the main line between Poprad and Košice at Spišské Vlachy. Although the main line is electrified at 3000v dc, the two branches in the area (the other goes to nearby Levoča) and the standard gauge lines heading north from Poprad are diesel worked. Currently the branch is only served by a summer tourist service using a 4 wheel railbus but freight still ran into the 2000s. I believe this may have stopped when the line was closed for some time when a bridge near Spišské Vlachy was washed out. The bridge was completely rebuilt but there was no evidence of any freight when I visited last year. The following photos were taken on a visit in October 2023. The station building The platform! This looks to have been a weighbridge Mrs Giz says this building used to handle grain The rolling stock shed. As it has recently been renovated my guess is that it is used to store the railbus when it is operating There used to be a wooden goods shed here (see Vlaky.net photos) Further prototype photos can be found here: https://www.vlaky.net/galerie/1712/spisske-podhradie/ https://www.vlaky.net/galerie/5247/spisske-podhradie-km-9-474/ Layout planning to follow in next post.
-
Here are a couple I did over 30 years ago, unfortunately the flushglaze has yellowed over the years: The maroon one has Replica commonwealth bogies and I had to cut holes in the floor to accommodate 14mm wheels. The blue and grey one has Lima B4s, reversed to get the traction rods the right way round and it did have Mainline couplings fitted but one appears to have fallen off. I fitted them with oval brass buffer heads that I obtained in bulk from somewhere.
-
Freight company Mainline, inspection saloon.
giz replied to PieGuyRob's topic in UK Prototype Questions
I remember seeing somewhere that DB999501-505 were rebuilt from withdrawn LMS kitchen cars. -
The easiest way to open up a Lima 2b is to hold both ends and twist in opposite directions. The roof will pop out of its clips and can then be removed. Sounds brutal but works.
-
You're lucky, I dug all my DC Kits DMUs out recently so they were to hand. IMG_20240227_0001.pdf IMG_20240227_0002.pdf
-
Mid 60s built Mk 2 BFKs and BSOs didn't have them either. Not sure if late build Mk1s had them or not.
-
@Magna Junction Here's what I did. The decoder is a Zimo MX637P22 6 function. When I fitted the decoder, head and tail lights worked plus one cab interior light. At the end that the cab light did not work (I can't remember which) I swapped the plug with the blue and green wires from the socket that it was in to the empty one next to it. I had to lever it out with a small screwdriver. Both cab lights then worked on separate functions. Note, this is one of the last run of 24s, the un-numbered ones, and the new 25s may be different. If the 25 has engine room lights in addition, which I think it may, a more than 6 function decoder would be needed to make them work.
-
I'll see what I can do tomorrow. Basically it meant removing one of the lighting leads from its socket and moving it to a spare one. It will work if you plug in a standard Plux22 chip except for one of the lights, which as standard is connected to pin 11 (which is present on their Zimo sound decoder but absent on all other Plux22). I think they did this Plux22 modification so that there will be enough outputs to independently switch all the lights on the 24/1 with the extra Scottish headlights, however other manufacturers seem to be able to do it, I think, using pins 3 and 4 (the data outputs)
-
I used a Zimo Plux 22 on my SLW class 24 but there was a problem. Because they use a special Zimo sound decoder which has the index pin space replaced by an extra live pin, the cab lights on one end would not work. A standard Plux 22 has 21 pins, the SLW one has 22. I got round it by swapping the lighting plug connection to another socket which was attached to another pin on the decoder socket and thus used one of the other function outputs from the decoder. This may be the same for the 25, maybe not.
-
Britain’s changing pattern of rail travel
giz replied to DavidB-AU's topic in UK Prototype Discussions (not questions!)
Like this? https://www.vagonweb.cz/fotogalerie/SK/ZSSK_Bdghmeer.php -
Looks like a Bachmann 36-553 or the ESU equivalent: https://www.hattons.co.uk/19639/bachmann_branchline_36_553_8_pin_3_function_0_75a_decoder_with_back_emf/stockdetail
-
Does any real 'Gronk' have Tri-ang features?
giz replied to Rhydgaled's topic in UK Prototype Questions
From around 1980 it appears to have been re-tooled with a new, more accurate body but still with inside frames: http://www.hornbyguide.com/item_year_details.asp?itemyearid=163 The original one then looks to have been used in the Thomas range -
Looks like the Playcraft one to me: http://www.playcraftrailways.com/Buildings1.htm The B326 Bridge Street
-
What is the text on the short sides of Class 108?
giz replied to Tramfabriek's topic in UK Prototype Questions
I don't think they originally envisioned that there would be non-driving motor cars in DMUs. It wasn't until the Trans Pennine six car sets in 1960 that there were any. -
I used to be a director of a trade association, it came with being the chair of their technical committee. I wasn't an employee nor was there any renumeration.
-
This site may be of help with both of your questions https://www.vagonweb.cz/razeni/ although it may take some searching through the earlier years. If you find a train formation containing the type of coach you are looking for then clicking the spyglass under that coach will give a list of other trains that year that contain the same type. e.g. https://www.vagonweb.cz/razeni/vlak.php?zeme=CSD&cislo=25&rok=1971 https://www.vagonweb.cz/razeni/razeni.php?rok=1971&vuz=ČSD+BRa+t*&najit=Hledat My guess is that you could run them with Type Y coaches. There is a wealth of information on vagonWEB but it may take some finding. Good luck. Edit: Found this formation from 1975/6, three of the older coaches, all seconds. The rest of the train are Type Y and include firsts: https://www.vagonweb.cz/razeni/vlak.php?zeme=CSD&kategorie=R&cislo=502&nazev=&rok=1976
-
The Triang EE Type 3 (class 37) isn't bad with a bit of work. I did this one forty years ago (was it really that long ago?). Lima Deltic bogies, new windscreens and fuel tanks plus big buffers.
- 255 replies
-
- 13
-
-
Class 37, by Accurascale
giz replied to Accurascale Fran's topic in Accurascale / Irish Railway Models
I found the easiest way to lower these was to push the pins out from inside using a small drill, then open the holes slightly larger to allow the bar to sit flush and fix with a small amount of solvent applied from inside.