Crewe North

Thanks to the LNW tender interchange policy some POW's did run with Whale tenders.... John

RIP Trev...will miss you

Nice build.......wonder why Gateneal decided to put all those rivets on the tank though ....but I've answered my own question....its a Gateneal kit... John

As a dietary change fromTunnocks the wrappers for Club biscuits work just as well..... John

I stand corrected....have just discovered an old copy of MRJ No.26 which has an account of a scratchbuilt Teutonic by the late Geoff Holt. The drive is a single motor on the back axle , the motor appears to be of the small Buhlar type. Anyway Geoff states that the completed model would haul 9 bogie vehicles on the level and 8 up a grade of 1 in a 100......true Teutonic performance! John

If memory serves correct the late Dave Walker, who designed the chassis , had a built up one running on his layout. The motor was placed centrally and drove front and rear axle , and happily pulled 5 or 6 coaches round. To power one axle even with weight you'll be lucky to pull the skin off a rice pudding . John

Not restricted to wagons.....there was an LNW 0-4-0 saddletank on there claiming to be 'built by Adrian'.....it was not as it was built by me for my 'Alexandra Yard' 7mm layout, Adrian bought it later. It went for a premium , for a 0-4-0 tank, I only hope that the buyer doesn't think he's got an Adrian Swain original. John

No need to put the balance pipe covers in the cab openings, the 2-4-0 tanks never had them as the fillers were on top of the side tanks. Might give you a bit more room in the cab.... John

Following on from a discussion on the LNWR Society forum regarding wagon grey it was decided that Humbrol 27 Storm Grey is very close. It'll do for me until somebody with a time machine goes back 150 years and returns with a pot of the gen stuff :-) John

Note also on these photos how the bottom segment of the circular smokebox door is rivetted to the smokebox door. The remainder is hinged to clear the bufferbeam John

Thanks for that....will investigate John

Following on from this......I have one of these excellent kits built and painted but for the life of me I can't seem to locate suitable transfers, has anybody located a source please. John

I have a 'thing' about Coal Tanks perhaps going way back to the old K's OO kit which you could buy for a fiver....then! The three I did were for customers and a case of once you'd done one you knew what you were up against for the other two. I don't know if they still supply cast coupling rods ,if so take care when handling the finished model as the prototype rods were thin thus the castings prone to bending if caught when handling. Attached photo of my current CT a Gladiator (ex Northstar) kit with scratchbuilt sloping smokebox as per the engine when first built. Kit is recommended if you fancy doing another one ! John

Late LNW, LMS and BR style brakes John

Just spotted a possible way out with the brakes......by the lamp brackets I take it you are building the LMS version if so then the later all metal brake hangers/blocks might be better, as the wooden blocks were being phased out by then John