Andrew P Posted June 13, 2015 Share Posted June 13, 2015 Hi Cav, I 've gone for the opposite to you in the construction on my New Baseboard for the BLT, its a 9mm top and 6mm sides, with a White Faced Hardboard back scene board. I find that the 9mm top has less of a drumming effect than 6mm. Link to post Share on other sites More sharing options...
RBE Posted June 13, 2015 Author Share Posted June 13, 2015 I dont mind a bit of noise. Trains are noisy! I wont get much with N gauge stock weight tbh. Outon road was completely 6mm and I was perfectly fine with the noise, the frames were pitifully weak though hence my upgrade to 9mm. 9mm is very thick for the actual baseboard. Ive always used 6mm as it is easily bent to achieve flowing changes in level. Not that I need that on Burton but I did on Outon Road. 1 Link to post Share on other sites More sharing options...
Crisis Rail Posted June 13, 2015 Share Posted June 13, 2015 I dont mind a bit of noise. Trains are noisy! I wont get much with N gauge stock weight tbh. Outon road was completely 6mm and I was perfectly fine with the noise, the frames were pitifully weak though hence my upgrade to 9mm. 9mm is very thick for the actual baseboard. Ive always used 6mm as it is easily bent to achieve flowing changes in level. Not that I need that on Burton but I did on Outon Road. Yes - that "slope"on Outon was quite an inspiration - easy to cut 6 mill leaving a slot then able to move to attain a gradual level - in MDF - which was used on the last mothballed project. Ian Link to post Share on other sites More sharing options...
RBE Posted June 13, 2015 Author Share Posted June 13, 2015 Yes its great for achieving slopes that are gradual and not a sudden fall which is what happens if cutting in thick material. Link to post Share on other sites More sharing options...
RBE Posted June 15, 2015 Author Share Posted June 15, 2015 Well this should please Andy. Some track going down! Yay. Still have the other board to assemble as the weather was rubbish over the weekend so indoor work only. I also did the yard area in fiNetrax bullhead on wood after these pics were taken but dont have a picture of that yet. I need to wait for some pcb sleepers to arrive now as the freight loops are flatbottom rail on wood on the prototype so will reproduce these with old school soldering of rail to copperclad. 6 Link to post Share on other sites More sharing options...
Guest bri.s Posted June 15, 2015 Share Posted June 15, 2015 Nice progress ,you've done more in a week than I have in a month lol Just wondering What did you use to stick the copper sleepers down at the baseboard edge? Brian Link to post Share on other sites More sharing options...
Andrew P Posted June 15, 2015 Share Posted June 15, 2015 Well this should please Andy. Some track going down! Yay. Still have the other board to assemble as the weather was rubbish over the weekend so indoor work only. I also did the yard area in fiNetrax bullhead on wood after these pics were taken but dont have a picture of that yet. I need to wait for some pcb sleepers to arrive now as the freight loops are flatbottom rail on wood on the prototype so will reproduce these with old school soldering of rail to copperclad. Excellent start Cav, that looks so neat, I need some lessons in neatness, hahah. Brilliant mate Link to post Share on other sites More sharing options...
RBE Posted June 15, 2015 Author Share Posted June 15, 2015 Cheers Brian, copper clad at board edges are always important as they keep the alignment in a delicate area. You may notice I used turnout timbers on mine (actually used OO ones on the fiddle yard end as they arent seen) these are a bit wider to provide a better surface for the glue to fix to. Once painted to match the concrete their impact should me minimal. I stick them down using extra strong contact adhesive as its instant hold and which once the rails are soldered in place I also soak around with superglue. I really dont want those coming adrift later on. Link to post Share on other sites More sharing options...
Guest bri.s Posted June 15, 2015 Share Posted June 15, 2015 Thanks for that Cav I'm soon starting track laying using the fintrax wooden sleeper flexi ,and copper sleepered turnouts so will be very interested in how you get on Brian Link to post Share on other sites More sharing options...
Pete Harvey Posted June 15, 2015 Share Posted June 15, 2015 It looks a bit pointless at the moment. Cav great to see progress. Pete Link to post Share on other sites More sharing options...
RBE Posted June 15, 2015 Author Share Posted June 15, 2015 Haha indeed. They are all on the other board! Link to post Share on other sites More sharing options...
RMweb Premium Ramrig Posted June 15, 2015 RMweb Premium Share Posted June 15, 2015 (edited) Hi Cav In answer to your first post I am sure the New Shobnall over bridge was built around 1993/94. I worked on the cable diversions around there when the old Moor Street under Bridge was closed. The new bridge was built on top of the old Bond End branch that went under the line there to Marstons Brewery. Sorry I cannot be more definite on the date Edited June 15, 2015 by Ramrig Link to post Share on other sites More sharing options...
RBE Posted June 15, 2015 Author Share Posted June 15, 2015 Cheers thanks for that. I will of course be modelling the Moor Street bridge too. I have managed to find the date the over bridge was built. 2nd April 1992. Right on the end on my modelling period really but I have to model it to provide a scenic break. I'd sooner be a tad out of era with that than have to compromise the overall scene due to 'absolute correctness'. 1 Link to post Share on other sites More sharing options...
Marcus 37 Posted June 15, 2015 Share Posted June 15, 2015 Layouts coming along really well mate. As everyone else has said its good to see you modelling again. Shall be interesting to see it develop. Cheers Marcus Link to post Share on other sites More sharing options...
RBE Posted June 15, 2015 Author Share Posted June 15, 2015 Well do you ever have one of those nights. I was all set to get board 2 assembled when I couldny find my alignment dowels. I looked high and low but nowhere to be seen. Anyway fishing through one of my modeling drawers I noticed the scalpel blade sticking up, hmm thats dangerous I thought so pushed it down and closed the drawer. The drawer wedged as the blade was popped back up by something in the bottom. So I poked it back down and held it there as I closed the drawer. Hmm that wasnt a good idea. As the drawer closed I trapped my little finger in the drawer and as I was holding the scalpel with my first finger and thumb the drawer front pushed the knife into the opening and straight through my little finger and out the back. Needless to say I was a bit shocked to say the least. So I pulled the knife back out quick and got a teatowel on it. Claret everywhere and a lost nights modelling. Moral to the story? Dont lose your baseboard dowels! Haha Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted June 15, 2015 RMweb Premium Share Posted June 15, 2015 Well do you ever have one of those nights. I was all set to get board 2 assembled when I couldny find my alignment dowels. I looked high and low but nowhere to be seen. Anyway fishing through one of my modeling drawers I noticed the scalpel blade sticking up, hmm thats dangerous I thought so pushed it down and closed the drawer. The drawer wedged as the blade was popped back up by something in the bottom. So I poked it back down and held it there as I closed the drawer. Hmm that wasnt a good idea. As the drawer closed I trapped my little finger in the drawer and as I was holding the scalpel with my first finger and thumb the drawer front pushed the knife into the opening and straight through my little finger and out the back. Needless to say I was a bit shocked to say the least. So I pulled the knife back out quick and got a teatowel on it. Claret everywhere and a lost nights modelling. Moral to the story? Dont lose your baseboard dowels! Haha Cav, The real moral of the story - "Don't p1ss about with scalpel blades". I always feel that a layout needs some sort of personal sacrifice. Every layout I've built bears some of my blood along the way - my "new" Deadman's Lane has already acquired a suitable sample of my DNA................. Cheers, Mick Link to post Share on other sites More sharing options...
RBE Posted June 16, 2015 Author Share Posted June 16, 2015 Yeah your moral is clearly correct. I was just adding a tongue in cheek twist. All I can say is its a good job we had some of those self adhesive stitches in the first aid box! Link to post Share on other sites More sharing options...
georgeT Posted June 16, 2015 Share Posted June 16, 2015 A good layout will cost us all a lot of blood, sweat and tears.. hahahah, apart from that Cav its looking good, think you will need more PCB board support on the track ends though ? Link to post Share on other sites More sharing options...
RBE Posted June 16, 2015 Author Share Posted June 16, 2015 I dont foresee any issues with the copperclad as is. When the boards are joined theyre protected and when in transit the boards are designed to sit on each other ying yang so the backscene of one covers the track ends of the other. Link to post Share on other sites More sharing options...
Andrew P Posted June 16, 2015 Share Posted June 16, 2015 Well do you ever have one of those nights. I was all set to get board 2 assembled when I couldny find my alignment dowels. I looked high and low but nowhere to be seen. Anyway fishing through one of my modeling drawers I noticed the scalpel blade sticking up, hmm thats dangerous I thought so pushed it down and closed the drawer. The drawer wedged as the blade was popped back up by something in the bottom. So I poked it back down and held it there as I closed the drawer. Hmm that wasnt a good idea. As the drawer closed I trapped my little finger in the drawer and as I was holding the scalpel with my first finger and thumb the drawer front pushed the knife into the opening and straight through my little finger and out the back. Needless to say I was a bit shocked to say the least. So I pulled the knife back out quick and got a teatowel on it. Claret everywhere and a lost nights modelling. Moral to the story? Dont lose your baseboard dowels! Haha Oooooo Double OUCH. Link to post Share on other sites More sharing options...
RBE Posted June 16, 2015 Author Share Posted June 16, 2015 Yes Andy Im still having spine shivery flashbacks this morning. Link to post Share on other sites More sharing options...
mason Posted June 16, 2015 Share Posted June 16, 2015 Not nice mate, masking tape plaster for the man Bit of blood on the boards is a must Link to post Share on other sites More sharing options...
P.C.M Posted June 16, 2015 Share Posted June 16, 2015 Hope the finger heals up ok Cav, I am glad I am not the only one who manages to draw blood. I sliced into my thumb last week it still had a bandage on now. It was healing quite well until I hit it on a door runner at the inlaws while trying to fix it. Cheers Peter. Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted June 16, 2015 RMweb Gold Share Posted June 16, 2015 All I can say is its a good job we had some of those self adhesive stitches in the first aid box! Superglue! That's what it was designed for Glad you're still here mate Al. Link to post Share on other sites More sharing options...
cornish trains jez Posted June 16, 2015 Share Posted June 16, 2015 Well this should please Andy. Some track going down! Yay. Still have the other board to assemble as the weather was rubbish over the weekend so indoor work only. I also did the yard area in fiNetrax bullhead on wood after these pics were taken but dont have a picture of that yet. I need to wait for some pcb sleepers to arrive now as the freight loops are flatbottom rail on wood on the prototype so will reproduce these with old school soldering of rail to copperclad. Looking great Cav! I see you have the solder paste out..,definitely one of my best friends! Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now