RSS Fetcher Posted January 8, 2019 Share Posted January 8, 2019 For about two years now, I have been planning on a modest T-trak layout. If you are not aware, T-Trak is a system based around Kato's Unitrak system, taking advantage of the strength of the joiners used. The modules are also based largely on Unitrak's standard lengths, with the normal straight module being 2mm shorter in length than a Kato double crossover, the largest single piece of track in the Unitrak catalog. Part of my goal with this layout is to run...whatever I damn well please! Rule 1 and the like. Still, I do want to strive for some realism. Part of my idea, therefore, was to build the scenic modules as generic as possible. Green rolling hills, which I've seen evidence of in the US, UK, Japan, basically anywhere I could think except Australia. No obvious signaling, no roads, nothing obvious to place the layout save for the train running through. I run into a dilemma here. I also would like a nice, longish bridge as a centerpiece. Nothing too grand, as the T-Trak standards don't allow for much height or depth to the modules, but a triple or quad (928mm and 1238mm, respectively) cutaway module for a good length or several lengths of span. I question, though, the suitability of Kato's bridges they have made available for Unitrak. There is a through-truss, and a box girder. The only country I have not seen evidence of such bridges being used in is the UK. So I pose a question; Does anyone who might pay attention to these have any knowledge or evidence of either bridge supplied by Kato being similar to a real bridge in the UK? Particularly Wales? Please let me know! View the full article Link to post Share on other sites More sharing options...
Recommended Posts