Jump to content
 
  • entries
    109
  • comments
    358
  • views
    144,945

"Doing up a Hornby B12"

S.A.C Martin

Entry posted by S.A.C Martin

2,924 views

 Share

Last week I wrote a blog which showed how I modified an old Hornby B12 to look a little more like a B12. I wasn't satisfied with it over the weekend, so stripped it down today, and started again this morning:

 

blogentry-1656-128026210698_thumb.jpg

 

I totally stripped the front bufferbeam after discovering a set of brass LNER buffers in the spare parts drawer. Finally, the moulded (and inherently bad) Hornby ones could be dispensed with, along with my plasticard guard irons (which I was not overly happy with). I drilled an extra hole so that the B12 could be dual braked (as 61572 and its classmates were, in service in the late 50s).

 

blogentry-1656-128026212088_thumb.jpg

 

Using the following tools: scalpel, stanley knife, various files, wet'n'dry paper and a lot of elbow grease, I removed the moulded on outside steam pipes. The B12 I am depicting, 61572, doesn't have these (nor has had these since its rebuild into a B12/3), so these disappeared along with various moulded on pipes, which I duly replaced with wire versions:

 

blogentry-1656-128026213111_thumb.jpg

 

I added a new set of guard irons to the front bufferbeam. These were made using scrap metal (thin aluminium), and cut to shape and size. At the same time, I also fitted a more realistic hook, the brass LNER buffers, and both brake pipes:

 

blogentry-1656-12802621566_thumb.jpg

 

I had also made a modification that had been annoying me for some time on the Hornby B12s:

 

blogentry-1656-128026219752_thumb.jpg

 

At the front of every B12 chassis is a chassis extension which plugs itself into the front of the B12's smokebox, coming out just below the smokebox door, and sticking itself outside the bodyshell, normally. This was wholly unrealistic, and with that, I removed the chassis extension. What I replaced it with, is nothing more than a bent piece of metal - specifically, that which holds in place a super detail Hornby model in its packaging, nowadays. This allowed the bodyshell to sit at the preferred height without having a bit of the chassis poking out the front. I filled in the gaping hole using Gamesworkshop moulding putty.

 

blogentry-1656-128026220847_thumb.jpg

 

I then turned my attention to the underside of the bodyshell. The frames have never exactly looked great, so I added some plasticard extensions to try and close the gap between bodyshell and bogie wheels:

 

blogentry-1656-128026222167_thumb.jpg

 

I then white-tacked up the nameplate, and covered the rest of the loco body, to spray the front of the bodyshell in Gamesworkshop "Chaos Black":

 

blogentry-1656-128026224308_thumb.jpg

 

I left it to dry for four hours, and then set about painting the front, using my usual acrylics:

 

blogentry-1656-128026226506_thumb.jpg

 

Not bad for an afternoon's work!

 

blogentry-1656-128026241725_thumb.jpg

 

Until next time.

 Share

4 Comments

Recommended Comments

Jamie

That's made a huge improvement to the side profile, by closing the bogie-frames gap. It was the one thing I remarked to myself on when reading your last entry.

 

Set of new Gibson bogie wheels would just be the cherry on top.

 

The B12 is such an elegant prototype. :)

  • Like 1
Link to comment
Guest Tom F

Guest Tom F

Posted

I too love the B12, and I was impressed with your last improvements.

 

But now mate, she is looking the part, closing the gap between bogies and frames really makes such a difference.

 

Notice those molded steam pipes have gone ;)

 

Lovely work mate, look forward to the next update :)

  • Like 1
Link to comment
S.A.C Martin

Thanks chaps.

 

I forgot to mention that I replaced all of the steps as well, which were broken, with cast resin ones I made by using another B12 as a mould of sorts! I did the same thing with the chimney (which looks too short, annoyingly. I may still have to fit a white metal one). Finally, I also added lamp irons, which again, I forgot to mention!

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...