Jump to content
 
  • entries
    76
  • comments
    344
  • views
    41,902

Cheddar update September - Palight


ullypug

1,011 views

Another month another update!

As I've had some time off I've been playing with the Palight sheets I bought and I have to say I'm really impressed with this stuff.

It's a foamed pvc sheet, denser than foam board and no skin as such, the material being the same consistency all the way through. It cuts with a scalpel, can be sanded, scribes really nicely and can be glued with Loctite 401.

I've used an artists scraper board blade ( no idea what the technical term is) much the same way I scribe DAS.

I'm just trying various paint options using Tamiya acrylics to represent mendip stone. Not quite there yet I think. It's too dark at present and needs a bit more experimentation.

However, once I've got the colour sorted I'm sure I'll be using this for the station and goods shed buildings.

The light wasn't the best but I've attached some photos so you can get the idea.

Edited to upload photos with lighter stonework.

  • Like 10

4 Comments


Recommended Comments

Hi,

    Just dropped in on this, trying to find Palight in Australia, do I really need an 8x4 sheet! the other point of note, whose is the lovely slope-sided wooden 20t mineral wagon behind the Pannier?

Cheers from Oz,

Peter C.

Link to comment

I'm not familiar with the prototype bridges Andrew, but there's something about the paint treatment that makes them look a little as though they've been Yorkstone clad. I'd have expected squared rubble rather than ashlar? And if ashlar, wouldn't parallel courses have been used? Perhaps the blocks as scribed might be a little 'flat' and might benefit from more relief?

Adam

Link to comment
  • RMweb Premium
Hi,

    Just dropped in on this, trying to find Palight in Australia, do I really need an 8x4 sheet! the other point of note, whose is the lovely slope-sided wooden 20t mineral wagon behind the Pannier?

Cheers from Oz,

Peter C.

Thanks Peter

The wagon is a Chivers kit but it's a trick of the camera lens, the sides aren't sloping!

As to smaller sheets? If you find any let me know!

Cheers

Andrew

Link to comment
  • RMweb Premium
I'm not familiar with the prototype bridges Andrew, but there's something about the paint treatment that makes them look a little as though they've been Yorkstone clad. I'd have expected squared rubble rather than ashlar? And if ashlar, wouldn't parallel courses have been used? Perhaps the blocks as scribed might be a little 'flat' and might benefit from more relief?

 

Adam

Mendip stone is an absolute bu66er to do. No one does a commercial sheet. Wills is too coarse. The Peco 2 mm sheet is ok but difficult to disguise the joins. The only over bridge I'm aware of on the Yatton to Wells stretch still in existence is at Winscombe so I've tried to copy it. Bits of squared rubble, dressed edges, coarsed quoins, it's all in there! You are right that it's too flat but I don't fancy the option of adding filler to individual stones to build up depth. I know someone who's done that and it took their sanity to the edge!

Then there's the colour. Much pinker towards Sandford and greyer towards Wells, reflecting no doubt the quarried source. You can see from the blog index photo that the main building had Ashlar/Sand stone too. Have lightened things a bit and it looks better.

All good fun!

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...