Back in 2009 I started work on building a TDA slurry tank, while these were not actually used in Cornwall (instead dedicated to Quidhampton), the other Quidhampton slurry tanks did appear in Cornwall (and I rather liked the prototype.)

The initial stages of the build are covered here, http://www.rmweb.co.uk/forum/viewtopic.php?f=8&t=74&start=575 on the old forum.

This is what the prototype should look like
https://www.flickr.com/photos/hmillington/2044676492/sizes/o/in/set-72157603195747980/

Picking up where I left off the first job was to add the angled sections at the ends, with the sides added from 40thou cut to shape and then a top from 20thou. (Having superglued the bogie retaining bolts into place.

It now needs the end handrails adding, buffers and a roof walkway. I also need to work out where I put the bogies when I last worked on it back in 2009...