A little more work completed

I have modified the spacers to provide clearance for the csb brackets, typically I forgot to take a photo. Im hoping that I have provided enough clearance, else some 'interesting' modifications will be needed.

Typically I have now realised that I don't have any short handrail knobs available, so cant fit them...

Ideally I want to get the CSB set up tested before I make a start on adding the detail parts, so that I can ensure clearances are all ok.

So I have now started sorting out the wheels, There is a slight step about 1mm up from the inner edge of a wheel (and then a further couple of mm which needs to be removed)

There is also a collar fitted to the crank pin which needed to be removed (going to look at reusing these on my 2800...

Hopefully will get some parts ordered soon so I can get on with it!!!

In the mean time, hopefully will finally get some plywood tomorrow so can have a brake from loco building and get the base boards done