Last night I dug put the  cutter and drew up a few components, adding a new ring (replacing a damaged brass part) for the roof grill on 057, along with some parts for 37612.

With these fitted the only thing left is to fit the NRM roof pod, (which I still need to find) and the rivets that will go on post priming.  So it was out with the primer.  It will now go back on the bench for further rework before reprinting and hopefully spraying in EWS next weekend.

while I had the cutter out I also included some parts to finish off 37612.  The missing cab doors were made from a 3 layer 10 thou core plus a window frame, they need a door handle fitting before painting blue and gluing in place.  They should take the Bachmann glazing...

Second was a fix to a mistake, where I had removed a window from both sides of the loco (whereas it should have only been the one). The window blank was pressed out, filler removed and the edges tidied up before gluing the new frame in place.  It now needs a paint touch up, before adding the OHLE stripe, number transfers and glazing.