It's bee a while since my last post, mainly due to lack of photogenic progress - and that hasn't changed really. However, I have made some steady progress with the wiring of the station board (board No. 4 in my scheme of things). This is now complete with the jumper cables, plug/socket for connection to the control panel, which will be mounted at the end of this board. Due to the position of the panel relative to the bulk of the pointwork and signals, lots of the wires just run from one end to the other but makes the wiring look more complex than it is. Nevertheless, there's certainly plenty of it under this board! I've tried to keep it all as neat as possible.

There are two jumpers to the panel, one terminating in a 25 pin plug, the other in a 25 pin socket - not that there are 50 wires, just more than the biggest plug i could obtain (37 pins). The following under-board shots show the tag strips with wires attached to the outer ends from the board and the inner ends to the jumper cables. The cables can be seen clipped in their transport positions, tucked out of harms way.

There may need to be a separate ribbon type wiring and plugs to carry the loco number describer info from the cassette fiddle yard to the main panel display - I think you need something like this when driving DCC locos from hidden sidings (loco address and forward/backward info)

In order to gather some scenic information, I visited the remains of Delph station yesterday to measure up the roadside retaining walls and try to get a feel for the types of trees/bushes, leaf colours, etc., as i intend to set the layout in April/May time. It's sad to say that the whole station area, with the exception of the station building, has been decimated since my initial visits. I was fully aware that a housing estate had been built on part of the goods yard and in the coal drops area, but I hadn't appreciated just how much collateral damage had been done to the old infrastructure. All quite sad. Still, some very useful information and photos were obtained, which will be a help later in the project.

Cheers,

Dave.