The timbering has been finished, but my thoughts turned to an eBay purchase of a Southeastern Finecast 02. Bought it as a part built 00 gauge loco, badly painted and in 00 gauge with a M7 box and a few parts from said M7 not the 02. Still did not pay too much and missing parts plus a new chassis etch and box ordered from SEF( The M7 box can hold one of my Wills M7's)

Anyway back to the 02, the Body was badly painted in grey and had a few traces of black paint. Chassis removed and the body was soaked in a caustic soda solution.

All the paint softened and washed off and the glue in most places degraded, so the parts can be cleaned up, the footplate had to be repaired and I decided not to remove the sides as they are a good fit. I also removed the old foot step pegs which had broken off into the footplate. At the same time as I ordered the new chassis I won a lot on eBay which had a set of Gibson milled frames along with other parts, so in theory I have 3 chassis

I now need to look at some photos as I need to know which version to build. I will use Markit wheels with a Highlevel gearbox, I would like a small can motor 1015 ? It came with a 1024 open frame motor and Gibson wheels, might be worth moving these on.

Will start on the common crossings for the track over the weekend