In between work deadlines, I have been trying to finish my 24/0 conversion to a 24/1, in this case 24124. This is essentially the Farish 24 with Alan's (etched pixels) nice set of etches allowing a 24/1 or 25/0 conversion.
24/1's were a staple of Kyle and more regular than the 24/0 so it really needed doing. It didn't quite make the last show but it is now almost ready to be weathered and represent a nice grubby version using the pic I have seen of 24124 at Kyle. It may well be that this gets sent for a sound chip conversion after I get to hear the one Kevin is undertaking on my other 24.
In addition, fuelled partly from my experiences at the last show, I have prepared some business cards for the layout as when people asked for details, I had left the pre-printed A4 information sheet at home Thanks to Pixie for the idea as detailed on his excellent layout thread.
These were designed in Indesign and then saved as PDF files and uploaded to Vistaprint. They turned them around in a few days and the quality is very sharp considering the size.
Whilst in Ryman's yesterday I noticed a small acrylic stand (meant for other uses I think) and I had the idea to scale down my information sheet to A5 size and have this as a small stand alone display adjacent to the layout. The card is actually a copy of the above mentioned information sheet so it contains a small description of the layout and on the rear the operating dimensions should someone enquire.
Here's a few pics...
Am now considering my next move and whether I start to make the boards for Thurso or whether I get side tracked again on my 7mm project
Food for thought indeed.
Comments welcomed as usual...