Jump to content
 
  • entries
    2
  • comments
    6
  • views
    2,711

LMS/BR Dynamometer car 3


macgeordie

2,067 views

I've finally managed to get somewhere with this project. I started it over a year ago but it has taken much longer than I expected. I decided to build Dynamometer car 3 after I completed the Brake coaches for the Mobile Test Unit train last year, here is a link to that workbench thread if anybody is interested. http://www.rmweb.co....t=29552&start=0

 

I had been using Dynamometer car 1 which was a Stevenson carriages kit, but later found a few pics showing DP1 and the Fell on the S&C under test and they were pulling Dynamometer Car 3 not Car 1 with the brake coaches, so I had to make one.

 

Fortunately, the coach still exists at Barrow Hill Roundhouse near Chesterfield in Derbyshire so I was able to go down there and photograph it inside and out as well as measure everything up, which made life much easier than than it was for the Brake coaches project.

 

There is a picture of the coach taken about a year ago below.

 

 

 

I've had the etches made for me by PPD of Lochgilphead. The following pictures are from the third test build which is now nearing completion.

 

 

 

blogentry-6711-039256300 1290611921_thumb.jpg

 

blogentry-6711-094634000 1290611989_thumb.jpg

 

blogentry-6711-057166900 1290612019_thumb.jpg

 

blogentry-6711-011175300 1290612037_thumb.jpg

 

I've still got the roof to finish, lots of shell vents and pipework, but fairly straightforward, then of course painting etc. I've asked Frank Warner of Scale Model Transfers to make some transfers for it, so hopefully they will arrive soon.

  • Like 1

5 Comments


Recommended Comments

Having seen this in the flesh at the recent Holmfirth show I can confirm just how superb this coach is.

 

I look forward to seeing it painted Ian.

  • Like 1
Link to comment
  • RMweb Premium
Having seen this in the flesh at the recent Holmfirth show I can confirm just how superb this coach is.

 

I look forward to seeing it painted Ian.

 

Hi Rob

 

Thanks for the compliments. This has been a long drawn out job but it's starting to come together now. I've finished the instructions (12 pages of A4) and I'm waiting for some bits from Comet to go out with the kits which I should get in the next few days. I'm not going to get anything else done for a few days now though as my son who lives near Lincoln is moving house tomorrow so we're going over to give him a hand. I was hoping to get some of the painting done Sunday or Monday but I think this cold weather will have put paid to any airbrushing, which I usually do in the garage due to the fumes etc. Still, if I can get the roof finished for this final test build I might get the painting done later in the week. Since I added the pictutres I have re-aligned the brake shoes to be more or less in line with the wheels which improves the appearence a bit, the shoes were dominating the bogie, although they are pretty much in the correct place for EM or P4 they are too far away from the wheels for '00'

 

Once I get this project out of the way I'll have a go at your coach sides, also I'll let you know when the kits are ready to go out if you still want one.

 

Cheers

Ian

Link to comment

Hi Rob

 

Thanks for the compliments. This has been a long drawn out job but it's starting to come together now. I've finished the instructions (12 pages of A4) and I'm waiting for some bits from Comet to go out with the kits which I should get in the next few days. I'm not going to get anything else done for a few days now though as my son who lives near Lincoln is moving house tomorrow so we're going over to give him a hand. I was hoping to get some of the painting done Sunday or Monday but I think this cold weather will have put paid to any airbrushing, which I usually do in the garage due to the fumes etc. Still, if I can get the roof finished for this final test build I might get the painting done later in the week. Since I added the pictutres I have re-aligned the brake shoes to be more or less in line with the wheels which improves the appearence a bit, the shoes were dominating the bogie, although they are pretty much in the correct place for EM or P4 they are too far away from the wheels for '00'

 

Once I get this project out of the way I'll have a go at your coach sides, also I'll let you know when the kits are ready to go out if you still want one.

 

Cheers

Ian

 

Cheers Ian, Yes I definitely still want one to go with my MTU coach. I plan to build them both together (fingers crossed).

Link to comment

Eleven years too late! I need to have one of these for my Rocket 150 project. I hope things have moved on and I don't need to get the parts fabricated like here.

Link to comment
  • RMweb Premium

Sorry but I sold the rights to this kit to Shawplan many years ago. Brian has since sold it on again so it probably isn’t available any more. You could try contacting Rob Pulham in the post above as he models mainly in 7mm so he might not need it anymore. 
Ian

  • Informative/Useful 1
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...