progress...of sorts...
Good morning,
Little bit more progress on the station building however watching 'catch up versions' of Spooks 10 has got in the way a little (two more to finish next week...no spoilers please!)
The station is a reduced version of the building as the prototype is significantly longer and probably to scale would stretch to meet the fiddleyard, so this is trying to capture the essence of Kyle. Whilst I am not trying to replicate it to the exact detail, if when I finish, the model can be recognised as Kyle, then I will be happy
I have used the evergreen sheeting cut into strips with a small 10 thou spacer between to try and create the sill and give the elevation some relief. I used a piece of clear perspex as a base to overlay on and the idea was to create the windows on this perspex but I will think that one through again as I have a little MEK-PAK creep.
The base profile is in place and now I will look to add smaller framing details, chimneys, canopy and windows and doors.
The station has been in various liverys(?) over the years including Blue and Green however I think the one that suits my period is a rather dull grey
More to follow when I have it...quick pic below...
Base shell in plasticard...excuse the twist in the canopy which I only noticed after photographing
- 2
6 Comments
Recommended Comments
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now