Jump to content

simonbaker1966

Members
  • Posts

    9
  • Joined

  • Last visited

Everything posted by simonbaker1966

  1. I have a digitrax dcs200 and the new dt602de. I also run digital cobalts and original cobalts. With my dt402 (now defunct) I was able to programme these and some ad-8fx decoders (dccconcepts) however the 602de absolutely refuses to do so. Any help would be greatly appreciated.
  2. Just received my new 602dt today. Plugged it in and nothing. 14 out of my 20 locos refused to move. Tried to reset the decoders but nothing. The good news is that the other 6 run fine. Resetting the decoders did not work and I am at a lost as to what has happened. I expect the odd decoder to fail once in a while but not 14 at once, most of which are sound chips.
  3. Has anyone had any experiance with replacing nem fitted tension lock couplings with ones that have wires attached?
  4. Just came across this thread and am delighted to see that the original cure has been reposted...I might now go and repurchase a 73 as I returned my original one back to Dapol, purley because of its poor running qualities.
  5. The church yard scene is crying out for some zombies...
  6. I believe the post regarding the mods on the pickups has "vanished"
  7. I recently purchased a class 128 from Hattons and installed a Lenz Silver Plus decoder. However after a few circuits of my layout it just grinds to a halt. The lights on the model remain on but it just does not budge. However if I turn off the power and then turn it back on the model will move. Any advice will be gratefully received.
  8. I recently purchased a class 128 from Hattons and installed a Lenz Silver Plus decoder. However after a few circuits of my layout it just grinds to a halt. The lights on the model remain on but it just does not budge. However if I turn off the power and then turn it back on the model will move. Any advice will be gratefully received.
×
×
  • Create New...