wellseasoned

This is really heartening news. I am a member of the 2mm Association which is a bonus. Purely as an example, a number of people have previously expressed an interest in the Hawksworth sleeper etches. As far as I can make out they haven't been produced in a long while. I got into building carriages as looking into my crystal ball around 5 years back, I could see the Farish offerings creeping up towards the £50 RRP, and they are very nearly there. This price tag could inspire others to try their hand at making a carriage. Therefore the continued availability of etches and castings is really good news. Thank you Nigel for passing on this positive news.

DavidK71, Really nice to see a post on this forum after such a long break. You have once again made a lovely job of this sleeper. Does anyone know what will/has become of the E.P. etches and castings? Ray of BH Enterprises has sadly recently passed, so the future of these etches may not be safe. Could we maybe be down to the offerings of Worsley works in the future?

The recent and forthcoming carriages from Farish are now teetering around the £50 per carriage. Yes, some big retailers will offer the 15% discount but they have still become expensive IMO. I really hope that somebody takes on the etched sides from E.P. It would also be good if those who have retreated from the production of etched sides in N, were to consider some limited runs. Maybe they could test the water to see how much interest is out there?

It's all very quiet on here, so I'll try to kick start things. Has anyone heard what is happening with the Etched Pixels range? If, and I hope it's not the case, the range fades into history, who is left doing the etched carriage sides and associated bit and pieces? Nothing in my latest 2mm association magazine which arrived recently.

Thank you for that info' Sithlord75. I am in the 2mm association. They have a range of carriage building parts, that has been steadily increasing in the couple of years I've been a member. I await the outcome of discussion/negotiations with interest.

Has anyone any news on what the future may hold for the E.P. products?

I've bought a few items from N'Tastic. The Brewers dray is very nice. I bought a pack of heavy horses to replace the now crude looking white-metal ones, pulling some of my Langley carts. A massive improvement! Also bought the Karrier refuse wagon, something I remember from my early years. As I model the early/mid 1950s I await more vehicles of this period. It's good to see 70s/80s vehicles for others, often sadly/unbelievably missed by by the major diecast manufacturer.

But then, the vents are really fiddly little devils that take so much time to line up, after achieving hopefully a really straight line of holes. I can invariably manage it, but hey, what a palaver. I have had no experience of 3D roofs, but I had some resin ones. I had a similar problem to Sithlord with thick ends and edges affecting them seating down. A lot of fettling and cussing to achieve an acceptable result. Perhaps the ideal is injection moulded roofs as used on proprietary models, but with that full compliment of vents that can be removed as required. I have some plain injection moulded roofs from the 2mm Association. They are a joy to seat down, but I still have to drill holes.

3d printed roofs are interesting. With so many variations of ventilators on different diagrams, would it be prudent to print them with a full complement of ventilators? Excess to requirements are carved/sanded away as required. Just a thought, although this may already happen? Marking out, drilling and fixing ventilators in unison is probably the most tedious and time consuming aspect for me.

It will be a real shame if it does go the way of the Dodo. The business has changed hands a couple/few times, and IMO still has a future. 3D printing is making ever increasing inroads within our hobby, and 3D carriages are out there. However, I do think that brass etches and actually building a carriage from a collection of parts will remain popular. Anyway, all we can hope is that the business is bought, possibly absorbed into a current range of similar (ish) products. E.Ps Hawksworth carriages are to 2mm scale, so maybe the 2mm association would be interested in these at least? We can only hope it doesn't go the way of the Dodo!

Good to see that things look to be slowly getting back to where they were on this site. Saddened that Etched Pixels is slowly being wound down/business closing. I wonder what will become of this important source of parts for our carriage building?

A heads up guys. I had a hunch this was in the offing due to so many OOS items having been so for so long. Hopefully somebody will take on the business, as it will be a considerable loss to us carriage builders. I placed an order with Alan a few days back.

It was a long time ago and I wonder what became of Jurgen and the layout. I think the very gently curved platforms added a lot of character to it, along with the adjacent babbling stream. I want the best of both World's, a main line and a single track branch line. My work in progress N gauge layout aims to cover both.

I was and remain captivated by the layout called Abermynach back at the beginning/mid 1980s. Indeed I have the three copies of R/M that featured it. Your superb layout is in the same vein and inspires me to build something loosely similar. I am wedded in N gauge and I'm tempted by the soon to be released Sonic models 56xx.

These will keep you busy for a while! I look forward to seeing progress when you are able to start work on them. Etched Pixels is now open for business after being closed for a year. I managed to get an order in quickly for some parts I had run out of. Looking just now a large number of items are now show as out of stock. Perhaps there has been an avalanche of orders leading to this? Alan at E.P. has said that some items will be discontinued/not re-ordered, citing some 3D printed ones. Hopefully this won't be too severe, and etches, buffers vents etc will continue in the range.