RMweb Premium Hilux5972 Posted August 24, 2019 RMweb Premium Share Posted August 24, 2019 (edited) I will be redoing my Goathland station diorama with the new Hornby Hogsmeade Buildings and wish to add the oil lamps this time. They seem to be maroon tapered lamp stands and I was wondering is anyone can recommend a good supplier of these? What have people used in the past? Ease of wiring would be good too as I’m not very experienced in that side of things, having used DCC for the longest time now. Something could have interior building lighting integrated would be even better. Any advice would be greatly appreciated. Would it be better to use a separate controller just for the lighting? Regards, Ryan Edited August 24, 2019 by Hilux5972 Added content Link to post Share on other sites More sharing options...
Free At Last Posted August 24, 2019 Share Posted August 24, 2019 http://www.gaugemaster.com/item_details.asp?code=GM863 Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted August 25, 2019 Author RMweb Premium Share Posted August 25, 2019 Are they easy to install and use? Separate controller preferable? Link to post Share on other sites More sharing options...
Darwinian Posted October 4, 2019 Share Posted October 4, 2019 I have the GWR version. They are 60mm tall without the extensions. Not seen many oil lamps taller. Wiring is straightforward as they contain grain of wheat type bulbs not LEDs so no polarity issue. They are supplied with a control circuit that allows you to adjust the brightness. DC or AC supply but it needs to be a regulated supply so either check the output with a volt/multimeter or use a wall adapter as suggested (info sent to my by DCC concepts who make the boards). The boards have sensibly sized solder pads to attach the input/output wires. I have no connection with either Gaugemaster or DCC concepts other than as a customer and have only just installed my sets. Link to post Share on other sites More sharing options...
Darwinian Posted October 4, 2019 Share Posted October 4, 2019 Further to the above note that although the control boards are marked DCC concepts the production is now by Gaugemaster. Link to post Share on other sites More sharing options...
Free At Last Posted October 4, 2019 Share Posted October 4, 2019 I noted this on the Gaugemaster site... Quote The lights themselves are made from brass and are finely scaled for OO modellers. Can anyone confirm this? Link to post Share on other sites More sharing options...
RMweb Premium Dave John Posted October 4, 2019 RMweb Premium Share Posted October 4, 2019 The heads are brass, posts are plastic. They are ok, but generally need a strip down, flash removed and a repaint. The lamps on the bridge there are the gaugemaster ones, but I rebuilt them, made the covers less fancy and shortened them a bit. There are very similar ones available direct from china at lower prices, but they need a bit more work. All of them are too bright, for a few add extra series resistors or the pwm type dimmer that come with the gaugemaster ones. Link to post Share on other sites More sharing options...
Darwinian Posted October 5, 2019 Share Posted October 5, 2019 My gaugemaster oil lamps have a brass tube that the post base extensions slide onto. I assumed this formed a core for the plastic post. No noticeable flash on mine. 1 Link to post Share on other sites More sharing options...
Guest CLARENCE Posted October 6, 2019 Share Posted October 6, 2019 Anyone any idea where I can obtain N gauge versions? Link to post Share on other sites More sharing options...
Darwinian Posted October 6, 2019 Share Posted October 6, 2019 I just tried soldering a short length of 0.7mm brass wire to the ends of the very fine wires. This fits through the hole needed for the lamp base and small choc block connectors will grip it (unlike the very fine wire) and it’s easier to get into them too. Needed to be able to remove my lamps to work on the platforms off the layout. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now