RMweb Gold 2mmMark Posted October 13, 2014 RMweb Gold Share Posted October 13, 2014 Here's the first batch of photos from the AGM First off, a Class 14 & Terrier from Jerry Clifford A GWR 45xx Praire - built by John Aldrick Ian Smith's GWR saddle tank - This won the Neil Ballantine Quaiche, for the best ex-RTR conversion Keith Gloster's Terrier. Apparently, this is the good side. The other side is equally fine too! A converted Farish 03. Nicely done by Martin Allen. Mark Link to post Share on other sites More sharing options...
RMweb Gold 2mmMark Posted October 13, 2014 Author RMweb Gold Share Posted October 13, 2014 Now some rolling stock. The "13.45 goods from Hayle Wharf". These were displayed as a train, but I couldn't take studio shots of the entire rake. Built by Andy Carlson, these won the John Barker Trophy. Steel coil wagons from David Smith GCR (ex LD&ECR), GER and M&GN horseboxes by Rich Brummitt LMS Non-corridor set as running on the S&D. Built by Keith Gloster. GWR Restaurant Car. Again, I need the builder's name. Link to post Share on other sites More sharing options...
RMweb Gold 2mmMark Posted October 14, 2014 Author RMweb Gold Share Posted October 14, 2014 A couple of non-rail vehicle shots, first is a Morris van and Foden lorry, 3d prints by Julia Adams. Next is a traction engine crane and log trailer from Jerry Clifford. This won the Malcolm Stone Award. Moving out of the portable studio, here are photos of the models on display. 3d printed wagons by Ian Smith Another shot of Andy Carlson's wagons assembled as a train. Private owner wagons by Bill Blackburn. Link to post Share on other sites More sharing options...
justin1985 Posted October 14, 2014 Share Posted October 14, 2014 Rich, the livery on the horseboxes is much paler than I had been imagining, based on no more than a guess that they'd be similar to equivalent passenger livery (i.e. teak or later crimson for GER). Do yours represent faded teak, or was horsebox livery a pale colour? Justin Link to post Share on other sites More sharing options...
RMweb Gold 2mmMark Posted October 14, 2014 Author RMweb Gold Share Posted October 14, 2014 Unusually this year, there were a lot of coaches on display. This rake of GWR corridor stock is impressive. The builder is John Aldrick. There was also a rake of GWR Cornish Riviera stock from John Aldrick which was hemmed in by other models so I was unable to get good photos but it is a superb model with detailed interiors. These coaches were coupled up as a rake so I didn't want to take them apart to get studio shots. Here are Ian Smith's lovely GWR 4-wheelers, These won the Dreadnought Trophy. Finally some LNER non-corridor stock Link to post Share on other sites More sharing options...
richbrummitt Posted October 14, 2014 Share Posted October 14, 2014 Rich, the livery on the horseboxes is much paler than I had been imagining, based on no more than a guess that they'd be similar to equivalent passenger livery (i.e. teak or later crimson for GER). Do yours represent faded teak, or was horsebox livery a pale colour? Justin I read somewhere that the GCR used Oak for their vehicles. I haven't found details for the LD&ECR that they came from in 1906 though. I thought about painting the GER one crimson but figured that it was unlikely to have been repainted by 1921 and much the home stock for the layout will be crimson because the GWR were using that colour at that time. I think that they should probably all be a lot darker but perhaps not as much as a proper varnished wood finish would have become because imitation teak was used on a lot of non-passenger vehicles according to what research I have done. I also found a reference to light umber for GCR vehicles, but without enough supporting information (dates &c) to make a decision. Link to post Share on other sites More sharing options...
RMweb Premium DavidLong Posted October 14, 2014 RMweb Premium Share Posted October 14, 2014 Mark, The Prairie and GWR corridor sets are by John Aldrick of Leeds. He attends our L & Y Group meetings so we have seen the coach numbers multiplying over the months. They are destined for Peter Kermond's model of St Ives. Peter himself as built half a dozen of the small Prairies (as noted in his MRJ article) as they would be needed for double-heading the up and down Riviera when it ran to St Ives. David Link to post Share on other sites More sharing options...
RMweb Premium 65179 Posted October 15, 2014 RMweb Premium Share Posted October 15, 2014 Looks like there was some real top notch modelling on show this year! Shame I couldn't get down to see it. Can I ask what won the Groves trophy? Simon Link to post Share on other sites More sharing options...
2mm Andy Posted October 15, 2014 Share Posted October 15, 2014 Looks like there was some real top notch modelling on show this year! Shame I couldn't get down to see it. Can I ask what won the Groves trophy? Simon It wasn't awarded as there were no entries. 2014 seems to have been the year of the coach! Andy Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted October 16, 2014 RMweb Gold Share Posted October 16, 2014 If Ian Smith had finished his small Metro it could have been another cup for him. The build is on RMweb. Don Link to post Share on other sites More sharing options...
Ian Smith Posted October 16, 2014 Share Posted October 16, 2014 If Ian Smith had finished his small Metro it could have been another cup for him. The build is on RMweb. Don Don, It's getting there though. The bunker is now complete, and tonight I've made the tool boxes and tank fillers for the top of the tanks. There's still a bit to do before Warley (where I'm hoping it will have a guest appearance on St Ruth for some of the weekend - it will be able to swap turns with my saddle tank taking it in turns hauling my 4 wheelers). When I've made a bit more progress I'll update my blog. Ian Link to post Share on other sites More sharing options...
autocoupler942 Posted October 16, 2014 Share Posted October 16, 2014 How soon will the AGM winners photo Gallery on the Association website get updated! Link to post Share on other sites More sharing options...
autocoupler942 Posted October 25, 2014 Share Posted October 25, 2014 How soon will the AGM winners photo Gallery on the Association website get updated! It's two weeks now since the AGM so just when will the Association Website get up to date with photos.of winning models? Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted October 25, 2014 RMweb Gold Share Posted October 25, 2014 It's two weeks now since the AGM so just when will the Association Website get up to date with photos.of winning models? These tasks are undertaken by volunteers who can sometimes find it difficult to do them as quick as they would like. Sometimes we have to be a little patient. Don Link to post Share on other sites More sharing options...
Nigelcliffe Posted October 26, 2014 Share Posted October 26, 2014 It's two weeks now since the AGM so just when will the Association Website get up to date with photos.of winning models? I would have hoped that those who took photos would send them in voluntarily. I emailed some of those who posted photos a week ago asking for copies. Nothing received and no replies. Most changes to the website get done within 24 to 48 hours of receipt of material. - Nigel (website manager) Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted October 26, 2014 RMweb Gold Share Posted October 26, 2014 Nigel I have received no email requesting copies of those I have posted (I have checked my spam folders). I did not send them to you because they were not fully comprehensive as I did not get photos of all entrants. I also assumed that someone had agreed to take photo specifically for Association use and did not want to bombard you with more. You are quite welcome to copies of mine. Do you want the compressed versions on here or the full sized originals? Don Link to post Share on other sites More sharing options...
Nigelcliffe Posted October 26, 2014 Share Posted October 26, 2014 Thanks Don, probably best to move the detailed discussion to email; could you email me at the website admin/information address please. - Nigel Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.