cheesysmith Posted June 29, 2015 Share Posted June 29, 2015 I am after information on the Hornby motor bogies, as used on everything from the vep/73 to the 153/Lima reissues. I have a 153, and have found the running of it perfectly ok. What I need to now is what have other people have found from these motor bogies, and as mine is packed away where I have no access to it in the near future, what are the axle sizes of said bogies? I ask as I have a long term plan that would require using a pair of these to make a loco, but would require rewheeling with bigger wheels. The size of the loco wouldn't let me use a normal loco drive system. Forgot to add, I am after one that would give me a 8'9" wheelbase. Link to post Share on other sites More sharing options...
Simon G Posted July 8, 2015 Share Posted July 8, 2015 I have one of these that I fitted into a Triang Blue Pullman dummy power car, and it runs very sweetly indeed. It is capable of pulling a standard formation of 6 coaches without the need for traction tyres, though I did add some weight over the bogie. Not sure of the wheelbase & wheel diameter, but I can measure them if it would help you? Link to post Share on other sites More sharing options...
lapford34102 Posted July 8, 2015 Share Posted July 8, 2015 According to this https://ultrascale.com/eshop/products/view/CAT007/384 they're 2.5mm diameter HTH Stu Link to post Share on other sites More sharing options...
cheesysmith Posted July 9, 2015 Author Share Posted July 9, 2015 Looks like I am going to have to open up the wheels I intend to use then. I wonder why they used something different from the standard 2mm axle? Link to post Share on other sites More sharing options...
Bill Radford Posted July 11, 2015 Share Posted July 11, 2015 I have a pair of 153s and have found them very good runners - but - there's always a but - I have under track magnets for uncoupling and they are affected by these, slowing the motor down. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.