Peco electrofrog slips

[sagaguy]

  Does any one know if you need extra switch gear to operate an electrofrog single slip if it is only fed by one controller or are the frogs switched by the point blades,i can`t seem to find a definitive answer.I used 4P 3way rotary switches to operate my code 55 e/f diamonds which work very well.I can find plenty of double slip diagrams but not single.

                      Ray.

 

 

[Grovenor]

 

.I can find plenty of double slip diagrams but not single.

That's because you can just use the same diagram, whether it is double or single.

Rgds

Keith

[sagaguy]

Ah,yes,i see now what you mean.I don`t want to use point motors so i think i need a DPCO toggle switch.

 

http://www.peco-uk.com/imageselector/Files/Instruction%20sheets/N%20Electrofrog%20Turnouts.pdf

 

 

 Thanks,Ray.

[RFS]

Ah,yes,i see now what you mean.I don`t want to use point motors so i think i need a DPCO toggle switch.

 

http://www.peco-uk.com/imageselector/Files/Instruction%20sheets/N%20Electrofrog%20Turnouts.pdf

 

 

 Thanks,Ray.

 

Both frogs need to be switchable independently, so if you're not using a pair of point motors (each with their own independent change-over switch), you will need two separate SPCO switches.

[dhjgreen]

Why not use a slide switch and wire in tube to operate the turnout, rather than flick of god? On here under slide switches

[Grovenor]

Ah,yes,i see now what you mean.I don`t want to use point motors so i think i need a DPCO toggle switch.

 

http://www.peco-uk.com/imageselector/Files/Instruction%20sheets/N%20Electrofrog%20Turnouts.pdf

 

 

 Thanks,Ray.

Its diagram 6 on that link, 2 by SPCO.

Keith