Quarryscapes Posted January 22, 2016 Share Posted January 22, 2016 Don't suppose anyone has any? I'm especially keen to see what the LMS ones look like up close as they may be suitable for passing off as Cambrian 4 bolt chairs. I'm already using LSWR ones as Cambrian 3 bolts by carefully scraping off the rib on the outer jaw! Link to post Share on other sites More sharing options...
dasatcopthorne Posted January 22, 2016 Share Posted January 22, 2016 The C&l website has some reasonable close ups. Link to post Share on other sites More sharing options...
Quarryscapes Posted January 23, 2016 Author Share Posted January 23, 2016 Nowhere near clear enough of the exactoscale chairs. Are the C&L 4 bolts to the same design? They don't claim to be LMS. I could use the C&L ones as Cambrian (by removing the inside rib) but I understand there is less thickness below the rail on the C&L ones so they couldn't be mixed with Exactoscale chairs on the same panel? Link to post Share on other sites More sharing options...
mightbe Posted January 27, 2016 Share Posted January 27, 2016 Many people mix C&L regular chairs with Exactoscale 'special' chairs and I've never heard of any issues, or even a difference in height. In fact, I've heard it said that they hold the rail at the same height, but I don't remember who'd said it. Either way, the Exactoscale chairs are a bit nicer overall. Quentin Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.