blueeighties Posted September 2, 2016 Share Posted September 2, 2016 Has anyone carried out any DCC fitting to Bachmann Brassworks shunters? I have some in the workshop which have been fitted with 00 chips and are very poor runners. Not sure if it's underpowered chips, or a poorly performing chassis. Link to post Share on other sites More sharing options...
norman Posted September 2, 2016 Share Posted September 2, 2016 Has anyone carried out any DCC fitting to Bachmann Brassworks shunters? I have some in the workshop which have been fitted with 00 chips and are very poor runners. Not sure if it's underpowered chips, or a poorly performing chassis. Zimo MX645 works perfectly for me. When you say poor runner, do you mean slow top speed or hesitant? Please explain more. Link to post Share on other sites More sharing options...
blueeighties Posted September 2, 2016 Author Share Posted September 2, 2016 Hi Norman. Hesitant, seems to struggle a bit to get going, which I thought was lack of power. However it also seems to bind a bit, which makes me think it's more chassis related. Link to post Share on other sites More sharing options...
norman Posted September 2, 2016 Share Posted September 2, 2016 Hi Norman. Hesitant, seems to struggle a bit to get going, which I thought was lack of power. However it also seems to bind a bit, which makes me think it's more chassis related. Hi Seems to be a mechanical issue - pickups/bearings etc. Try running it for an hour or two on a rolling road perhaps. Or strip down and check all for fit and function. My one runs faultlessly on speed step 1 - just crawls. Link to post Share on other sites More sharing options...
blueeighties Posted September 4, 2016 Author Share Posted September 4, 2016 Happy to report I now have it running like a dream on speed step 1. A tiny amount of lubrication to the drivetrain, but lots of fiddling with the speed curve and emf settings have sorted the rest. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.