ausroco Posted October 16, 2016 Share Posted October 16, 2016 Hello all, I am new on this forum. After having spend a whole frustrating w/end to ge the Z21 (black) working on my test set-up I decided to ask some questions. May be someone could lead me in the right direction. Problem; - First I could connect and control the loco with the Notepad. - After connecting the TPG router to the network with a cable and running maintenance.exe it did not connect! Re-booted, etc did try everything, no luck. - When I did try again on sunday the wireless connection gave me an error on the z21 ... not in range! - Finally I noticed the name of the TPG router had changed! Eventually I managed to log onto the router wit a completely different IP address and reset the IP to 192.168.0.111 and change the name to z21 again - Now, when running maintenance.exe still same message that it can not connect! Ping 192.168.0.111 = OK - Notepad, connection confirmed but still when running wireless symbol red x Many thanks in advance Erwin Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.