Zimo SC68 Cap wire connection to Zimo MX 645R

[michaelp]

Hello all,

The small Blue wire on the Zimo SC68 Supercap has become detatched from the Zimo MX 645R decoder, am I correct in thinking it connects to the pad next to the Grey wire?

Thought I better ask to be sure rather than just do it and hope for the best.

 

Michael

[tractor_37260]

Hello all,

The small Blue wire on the Zimo SC68 Supercap has become detatched from the Zimo MX 645R decoder, am I correct in thinking it connects to the pad next to the Grey wire?

Thought I better ask to be sure rather than just do it and hope for the best.

 

Michael

 

Yep the Blue and Grey wires are for a cap, ensure you don't bridge the 2 pads when you re connect the Blue wire to the pad next to the Grey wire on the decoder !  It should be visable which pad the wire broke off from - the Grey wire is at the edge of the decoder board, the Blue wire (inside) next to it.

Edited June 18, 2017 by tractor_37260

[michaelp]

Thanks for that, I just wanted to be sure.